Ben’s Mega USA Tour
Last month we put out a blog post advertising that I would be doing a tour of America, with a rough initial route, and we welcomed requests for visits.
Over the next couple of weeks I was overwhelmed with visit requests – I plotted all the locations on a map and created a route aiming to reach as many as possible. This meant covering some distance in the South East before heading back up to follow the route west towards Utah. I prepared a set of slides based on my EuroPython talk, and evolved the deck each day according to the reception, as well as making alterations for the type of audience.
With launching the Education Fund, being in Berlin for a week for EuroPython followed by YRS week and a weekend in Plymouth, I’d barely had time to plan the logistics of the trip – much to the annoyance of our office manager Emma, who had to book me a one-way hire car with very specific pick-up and drop-off locations (trickier than you’d think), and an internal flight back from Salt Lake City. I packed a suitcase of t-shirts for me to wear (wardrobe by Pimoroni) and another suitcase full of 40 brand new Raspberry Pis (B+, naturally) to give away. As I departed for the airport, Emma and Dave stuck a huge Raspberry Pi sticker on my suitcase.
When checking in my suitcase the woman on the desk asked what the Raspberry was, and her colleague explained it to her! In the airport I signed in to the free wifi with one of my aliases, Edward Snowden. I started to think Phil McKracken or Mr. Spock might have been a better choice once I spotted a few security guards seemingly crowding around in my proximity…
Mon 4 – NYC, New York
I managed to board the flight without a federal investigation (although I may now be on the list, if I wasn’t already), and got chatting to the 60 year old Texan lady I was seated with, who hadn’t heard about Raspberry Pi until she managed to land a seat next to me for 8 hours. I had her convinced before we left the ground. I don’t know how he does it, but Richard Branson makes 8 hours on a tin can in the sky feel like heaven. Virgin Atlantic is great!
Upon landing at JFK I was subjected to two hours’ queuing (it was nice of them to welcome us with traditional British pastimes), followed by a half-hour wait to get through customs. I felt I ought to declare that I was bringing forty computers in to the country (also stating they were to be given away), and was asked to explain what they were, show one to the officer who took hold of one of the copies of Carrie Anne‘s book, Adventures in Raspberry Pi, to validate my explanation. Fortunately I was not required to participate in a pop quiz on Python indentation, GPIO, Turtle graphics and Minecraft, as he took my word for it and let me through. I was then given the chance to queue yet again – this time about 45 minutes for a taxi to Manhattan. I arrived at Sam‘s house much later than I’d anticipated much she was there to greet me by hanging her head out the window and shouting “MORNING BEN”. An in-joke from a time we both lived in Manchester.
We ate and met my friend-from-the-internet Aidan, we went to a bar until what was 5am on my body clock. A sensible approach, I thought, was to just stay up and then get up at a normal time the next day. I awoke and saw the time was 6.00 – my jetlagged and exhausted mind decided it was more likely to be 6pm than 6am, but it was wrong. I arose and confirmed a meeting time and place for my first visit – just a few blocks away from Sam’s apartment in Manhattan.
Tue 5 – NYC, New York
I met Cameron and Jason who had set up a summer class teaching a computing course for locals aged 18-and-under for 2 weeks, delivered purely on Raspberry Pis! I chatted with them before the students arrived, and they told me about how they set up the non-profit organisation STEMLadder, and that they were letting the students take the Pis home at the end of the course. Today’s class was on using Python with Minecraft – using some material they found online, including a resource I helped put together with Carrie Anne for our resources section.
I gave an introduction about the Raspberry Pi Foundation and showed some example projects and then the kids did the Python exercises while working on their own “side projects” (building cool stuff while the course leaders weren’t looking)!
Thanks to Cameron and Jason for taking the opportunity to provide a free course for young people. A perfect example use for Raspberry Pi!
Wed 6 – Washington, DC
On Wednesday morning I collected my hire car (a mighty Nissan Altima) and set off for Washington, DC! I’ve only been driving for less than a year so getting in a big American car and the prospect of using the streets of Manhattan to warm up seemed rather daunting to me! I had a GPS device which alleviated some of my concern – and I headed South (yes, on the
wrong side of the road).
I’d arranged to meet Jackie at 18F – a digital services agency project in the US government General Services Administration. This came about when I met Matt from Twilio at EuroPython, who’d done a similar tour (over 5 months). After a 6 hour drive including horrendous traffic around Washington (during which I spotted a sign saying “NSA – next right – exployees only“, making me chuckle), I arrived and entered 18F’s HQ (at 1800 F Street) where I had to go through security as it was an official government building. I was warned by Jackie by email that the people I’d be meeting would be wearing suits but I need not worry and wear what I pleased – so I proudly wore shorts and a green Raspberry Pi t-shirt. I met with some of the team and discussed some of their work. 18F was set up to replicate some of the recent initiatives of the UK government, such as open data, open source projects and use of GitHub for transparency. They also work on projects dealing with emergency situations, such as use of smartphones to direct people to sources of aid during a disaster, and using Raspberry Pis to provide an emergency communication system.
We then left 18F for the DC Python / Django District user group, where I gave a talk on interesting Python projects on Raspberry Pi. The talk was well received and I took some great questions from the audience. I stayed the night in Washington and decided to use the morning to walk round the monuments before leaving for North Carolina. I walked by the White House, the Washington Monument and the Lincoln Memorial and took some awkward selfies:
Thu 7 – Raleigh, North Carolina
I left DC and it took me 6 hours to get to North Carolina. I arrived at the University (NCSU) in Raleigh just in time for the event – Code in the Classroom – hosted at the Hunt library and organised by Elliot from Trinket. I set my laptop up while Elliot introduced the event and began my talk. There was a good crowd of about 60 people – from around age 7 to 70!
The talk went down well, and I received many questions about teaching styles, classroom management and the future of the hardware. One older chap, who has been running a summer coding club on the Pi shouted out: “Where were you two weeks ago when I needed you!?” when I answered one of his questions, which generated laughter from the audience. I also had a teacher approach me after the talk asking if she could take a selfie with me to show her students she’d met someone from Raspberry Pi – I happily obliged and showed her some of my awkward selfies from Washington, DC. She asked if we could take an awkward one too – needless to say, I happily obliged!
Elliot had arranged a room next door to the lecture theatre with some Pis set up for kids to play on. I gave out some Pis to the kids and it was well over an hour before the last of them were dragged home by their parents. I chatted with Elliot and the others about them setting up a regular event in Raleigh – as there was obviously huge demand for Pi amongst kids and adults in the area and beyond (I’d heard someone had driven up from Florida to attend the talk!) – and so I look forward to hearing about the Raleigh Raspberry Jam soon! A few of us went out to get pizza, and we were accompanied by one of the smartest kids I’ve ever met – and among interesting and inspiring conversation, he kept asking me seemingly innocent questions like “what do you call that thing at the back of your car?” to which I’d reply with the British word he wanted me to speak! (It’s a boot.)
Here’s a video of the talk:
I thanked Elliot and departed for Greensboro, where I’d arranged to stay with my friend Rob from my university canoe club, and his wife Kendra.
Fri 8 – Charlotte, North Carolina
In the morning I left for UNC Charlotte where I spoke to embeddable systems engineering students at EPIC (Energy Production Infrastructure Centre). There was a good crowd of about 60 students and a few members of staff. When I entered the room they were playing Matt Timmons-Brown’s YouTube videos – what a warm-up act!
Following the talk I chatted with students about their projects, answered some questions, deferred some technical questions to Gordon and Alex, and was taken out to a brilliant craft beer bar for a beer and burger with some of the staff.
In the evening Rob, Kendra and I went out to eat – we had a beer in a book shop and ate bacon (out of a jam jar) dipped in chocolate. True story. We also took some group awkward selfies:
Sat 9 – Pigeon River, Tennessee
The Saturday I’d assigned to be a day off – I hoped to go kayaking with Rob but he had to work and Kendra was busy so Rob put me in touch with some paddling friends who welcomed me to join them on a trip to the Pigeon River in Tennessee! An early start of 6am left me snoozing in the back of the car, which Matt took the chance to snap a picture of and post it to Facebook (I only found out when Rob mentioned it later that evening). We had a nice couple of runs of the river by kayak, accompanied by a rafting party. And another awkward selfie.
Sun 10 – Lawrenceville, Georgia
On Sunday morning I left Rob and Kendra’s for Georgia. One of the requests I’d had was from a man called Jerry who just wanted to meet me if I was passing by. I said it’d be great if he could set up a public meeting to be more inclusive – and he got back in touch with a meetup link for an event at Geekspace Gwinnett – a community centre and hackspace in Lawrenceville. I pulled up, shook hands with Jerry and was shown to the front of the room to connect up my laptop. There was a larger crowd than I’d imagined, seeing as Jerry had set the event up just a few days prior to this – but there were about 40 people there, who were all very interested in Raspberry Pi and after my talk we had a great discussion of everyone’s personal projects.
Liz, who runs marketing for the space, gave me a tour, and Joe, the guy setting up the AV for my presentation spotted the Adventure Time stickers on my laptop and told me he worked for Turner in Atlanta who broadcast Cartoon Network, and offered to give me a tour of the network when he went on his night shift that evening. I went to Jerry’s house where he and his wife cooked for me and he showed me Pi Plates, the extension board he’s been working on.
I then left to meet Liz and her husband, Steve, who has been working on a huge robotics project – a whole wearable suit (like armour) that’s powered by a Pi and will make sounds and be scary! I look forward to the finished product. They also have an arcade machine Steve built years ago (pre-Pi) which houses a PC and which, he claims, had basically every arcade game ever on it.
We set off for Atlanta at about 11.30pm and I witnessed its beautiful skyline, which is well lit up at night. We arrived at Turner and met Joe, who gave us the tour – I’ve never seen so many screens in my life. They show all the broadcast material for TV and web on screens and have people sit and watch them to ensure the integrity of the material and ensure the advertising rules are adhered to. We also saw the Cartoon Network floor of the office side of the building where staff there work on the merchandise for shows like Adventure Time!
Joe also showed us the Turner Makers room – a mini hackspace for the Turner staff to work on side projects – he told me of one which used a Raspberry Pi to control steps that would light up and play a musical note as you walked across them. They’re currently working on a large games arcade BMO with a normal PC size screen as a display – I look forward to seeing it in action when it’s finished.
It’s great to see the space has since set up their own monthly Raspberry Pi group!
Mon 11 – Chattanooga, Tennessee
I then left Georgia to return to Tennessee, where I’d arranged to visit Red Bank Middle School in Chattanooga. I arrived at the school, signed in to get my visitor’s badge and met Kimberly Elbakidze – better known to her students as Dr. E – who greeted me with a large Subway sandwich. I ate in the canteen and while chatting with some of the staff I noticed the uniformed security guard patrolling the room had a gun on his belt. Apparently this is normal in American schools.
It was the first day back at the school, so the children were being oriented in their new classes. I gave two short talks, introducing the Raspberry Pi and what you can do with it – to sixth and eighth graders, and opened for some questions:
“Do you like Dr. Who?”
“Is that your real accent?”
“Are you really from England?”
“Can I get a picture with you?”
“Can I keep Babbage?”
I wrapped up, left them a copy of Carrie Anne’s book and some Pis, and went on my way. I’d intended to get online and confirm the details of my next school visit (I’d arranged the date with the teacher, but we hadn’t settled on the time or what we were doing), but access to the internet from the school was restricted to staff so I couldn’t get on. I had to set off for Alabama, and only had the school name and the town. I put the town name in to my car’s GPS and set off.
Tue 12 – Talladega, Alabama
I arrived in Talladega town centre unsure how close I was to the school. I parked up and wandered down the main street in magnificent sunshine and intense heat looking for a McDonald’s or Starbucks, hoping to get on some WiFi to check where it was. With no luck, I headed back to the car and decided to just find a hotel and hope that I was at least nearby. I asked someone sitting outside a shop if they knew of the school – RL Young Elementary School – and they said it was just 15 minutes or so away, so I asked for a nearby hotel and she pointed me in the right direction. As I neared the car, the intense heat turned in to a terrific storm – the 5 minute drive to the hotel was in the worst rain I’ve ever seen.
I checked in to the hotel and got on with my emails – I sent one to the teacher who’d requested me at the school to say I’d arrived in Talladega, that I was staying in the Holiday Inn, and asked what time I should come in. My hotel phone rang 5 minutes later – it was the husband of the teacher. Trey said the principal hadn’t been told about the visit yet, and the details needed to be confirmed with her before we set a time – but they would sort it out as soon as possible and let me know. He offered to take me out for a meal that night so I arranged to meet him within an hour. Just as I was leaving I got an email from someone called Andrew who said he’d just spotted I was in Talladega, and asked if I could meet him if I had time – I said if he could get to the restaurant, I’d be there for the next couple of hours.
As I arrived I met them both, and introduced them to each other. Driving through that afternoon I’d noticed the town has about 50 churches. Trey said he recognised Andrew’s surname, and Andrew said his father was the priest of one of the churches, and Trey said he knew him. Andrew was also training to become a priest like his Dad, and Trey said he’d skipped Bible school that night to come and meet me. We had a nice meal and a chat and Trey said he’d let me know in the morning what the plans for the school visit were. Andrew offered to take me out for breakfast and show me around the town. I said I’d contact him in the morning once I’d heard the timings from Trey.
Once I woke up the next morning my email told me I needed to be at the school for about 1pm, so I had time to go to breakfast with Andrew, and he showed me around the place. I also visited his home and his church and met his family. He showed me some Raspberry Pi projects he’s been working on too.
He also offered to help out at the school – RL Young Elementary, so we got my kit and he drove us over. We signed in at reception where we entered our names in to a computer which printed visitor labels (seriously – a whole PC for that – and another just showing pictures of dogs! The Raspberry Pi was definitely needed in this place).
I was to follow a woman from the Red Cross, who gave a talk to the children about the importance of changing their socks every day. I thought an introduction to programming with Minecraft might blow their smelly socks right off!
The principal attempted to introduce me but had no idea who I was or why I was there, so just let me get on with it. I spoke to the young children and introduced the Raspberry Pi, focusing on a Minecraft demo at the end where I let them have a go themselves. The principal thanked me, said it was interesting and wished me a safe trip back to Australia! I left them some Pis and a copy of Adventures in Raspberry Pi.
Wed 13 – Somerville, Tennessee
I’d arranged my next visit with a very enthusiastic teacher called Terri Reeves from the Fayette Academy (a high school) in Somerville, Tennessee. In her original request she’d said she wasn’t really on my route, but would be willing to travel to meet me for some training – but I explained I’d changed my route to try to hit as many requests as I could, so I’d be happy to visit the school. She offered to let me stay at her house, and told me her husband would cook up some Southern Barbecue for me on arrival. It was quite a long drive and I arrived just after sunset – the whole family was sitting around the table ready to eat and I was welcomed to join them. I enjoyed the Southern Barbecue and was treated to some Razzleberry Pie for dessert. I played a few rounds of severely energetic ping pong with each of Terri’s incredibly athletic sons and daughters before getting to bed.
I spent most of the day at the school, where I gave my Raspberry Pi talk and demo to each of Terri’s classes. Again, it was the first week back for the school so it was just orientation for students settling in to their classes and new routines. The information went down well across the board and Terri said lots of students wanted to do Raspberry Pi in the after-school classes too.
I joined some students for lunch, who quizzed me on my English vocabulary and understanding of American ways – they thought it was hilarious when I pointed out they said “Y’all” too much. I suggested they replace it with “dawg”. I do hope this lives on.
I also took a look at a project Terri had been trying to make in her free period – she’d been following some (really bad) instructions for setting up a webcam stream from a Pi. I diagnosed the problem fairly quickly – the
apt-get install motion command she’d typed had failed as the site containing the
.deb (hexxeh.net) was blocked on the school network (for no good reason!) – I asked if we could get it unblocked and the network administrator came over and unblocked it. She originally only wanted to unlock it for the Pi’s IP address but I explained it would mean no-one could install things or update their Pis without access to that website, so she unlocked it from the system. I tried again and there were no further problems so we proceeded to the next steps.
See the blog posts about my visit on the Fayette Academy blog.
I then drove about an hour West to Downtown Memphis where I spent the early evening between Elvis Presley Boulevard and Beale Street (no sign of a Clive museum, just a row of Harley Davidsons) where I bought a new hat, which soon became the talk of the office.
When I returned to Terri’s house she asked me to help her with webcam project again – I checked she’d done all the steps and tried opening the stream from VLC Player on my laptop. I’ve never heard anyone shriek with joy so loud when she saw the webcam picture of us on that screen! Terri was overjoyed I’d managed to help her get that far.
Thu 14 – Louisville, Kentucky
I left the next morning for Louisville (pronounced Lou-er-vul), and en route I realised I’d started to lose my voice. I arrived in the afternoon for an event at FirstBuild, a community hackspace run by General Electric. The event opened with an introduction and a few words from me, and then people just came to ask me questions and show me their projects while others were shown around the space and introduced to the equipment.
Check out this great write-up of the FirstBuild event: Louisville, a stop on US tour for credit-card sized computers.
We then proceeded to the LVL1 hackerspace where I was given a tour before people arrived for my talk. By this point my voice had got quite bad, and unfortunately there was no microphone available and the room was a large echoey space. However I asked people to save questions to the end and did my best to project my voice. I answered a number of great questions and got to see some interesting projects afterwards.
Fri 15 – St. Louis, Missouri
Next – St. Louis (pronounced Saint Lewis), Missouri – the home of Chuck Berry. I had a full day planned by teacher and tinkerer Drew McAllister from St. John Vianney High School. He’d arranged for me to meet people at the Grand Center Arts Academy at noon, then go to his school to speak to a class and the after school tech club followed by a talk at a hackspace in the evening.
I was stuck in traffic, and didn’t make it to the GCAA meetup in time to meet with them, so we headed straight to the school where I gave a talk to some very smartly dressed high school students, which was broadcast to the web via Google Hangouts. Several people told me afterwards how bad my voice sounded on the Hangout. Here it is:
I had a few minutes’ rest before moving next door to the server room, where they host the after school tech club – Drew kindly filled in the introduction of the Pi to begin (to save my voice) and asked students if they knew what each of the parts of the Pi were for. I continued from there and showed examples of cool projects I thought they’d like. I gave Drew some Pis for the club and donated some Adafruit vouchers gifted by James Mitchell – as I thought they’d use them well.
Drew showed me around St. Louis and took me out for a meal (I consumed lots of hot tea for my throat) before we went to the Arch Reactor hackerspace. I gave my talk and answered a lot of questions before being given a tour of the space.
Sat 16 – Colombia, Missouri
In the morning I left in the direction of Denver, which was a journey long enough to have to break up over two days. With no visit requests in Kansas City, but one in Colombia, which was on my way but not very far away, I stopped there to meet with a group called MOREnet, who provide internet connection and technical support to schools and universities. Rather than have me give a talk, they just organised a sit-down chat and asked me questions about education, teacher training and interesting ways of learning with Raspberry Pi. Some of the chat was video recorded which you can watch at more.net (please excuse my voice).
I even got to try Google Cardboard – a simple virtual reality headset made with cardboard and an Android phone. A very nice piece of kit! I stayed a couple of hours and made my way West. I’d asked around for a good place to stay that night on my way to Denver. Some people had suggested Hays in Kansas so I set that as my destination. It had taken me 2 hours to get to Columbia and would be another 6+ hours to Hays, so it was always going to be a long day, but at least I was in no rush to arrive anywhere for a talk or event.
I stopped briefly in Kansas City (actually in the state of Missouri, not Kansas) to find almost nobody out and almost everything closed. I think it’s more of a nightlife town. I finally arrived in Hays at 8.30pm after the boring drive through Kansas and checked in to a hotel just in time for a quick dip in the swimming pool.
Sun 17 – Denver, Colorado
I left Hays for Denver, which meant I had a good 5+ hour drive ahead – all along that same freeway – the I-70, to arrive at denhac, the Denver Hackspace for 4pm. I’d also arranged late the night before to visit another Denver hackspace afterwards, so I said I’d be there at 7pm. On my way in to Denver I noticed a great change in weather – and saw lots of dark grey and black clouds ahead – and as I got closer I entered some rough winds and even witnessed a dust storm, where dust from the soil and crops of the fields was swept in to the air. It was surreal to drive through!
I worked out later that the distance I’d travelled that day was roughly equivalent to driving from Southampton to Inverness! The longest I’ve driven before is Southport to Cambridge!
I arrived just on time and was greeted by Sean, who had invited me. He introduced me to the members, all sitting around their laptop screens, and was given a tour of the space. He was telling me how the price of the space had been rising recently due to the new demand for warehouse space such as theirs for growing cannabis, now that it is legal in Colorado. I took some pictures of cool stuff around the space, including a Pibow-encased Pi powering a 3D printer. I even got to try on Sean’s Google Glass (I think Cardboard is much better).
I met a young girl, about 12 years old, who told me she recently went in to an electronics shop saying she wanted to buy a Raspberry Pi for a new project, and the member of staff she spoke to had never heard of a Raspberry Pi and assumed she wanted to cook one. Anyway, I gave her one of mine – she was delighted and immediately announced it in the networked Minecraft game she was hosting. I gave my talk in their classroom (great to see a classroom in a hackspace) before heading to my next stop – TinkerMill.
TinkerMill is a large hackspace, coworking space and startup accelerator in Denver. On arrival a group of people were sitting ready for my talk, so I got set up and was introduced by Dan, who runs the space and works out of it. The hackspace version of my talk includes more technical detail and updates on our engineering efforts. This went down well with the group and after answering a few questions we broke out in to chat when we discussed the Pi’s possibilities and what great things have come out of the educational mission.
See the write-up of my visit on the TinkerMill blog – Ben Nuttall from Raspberry Pi Foundation visits TinkerMill.
I also met a woman called Megg who was standing at the back of the room, I got chatting to her and she asked me a few questions. She hadn’t attended the event but just came to use the laser cutter for the evening, and caught the end of the talk. She kept asking me questions about the Pi, and in answering them I basically gave the talk again. She said the reason she’d not come to the talk was that she was looking to use the Arduino in some future projects because she assumed it would be easier than using a Pi, based on the fact she’d heard you could do more with a Pi, so it must be more complex. I explained the difference to her hoping this would shed light on how the Pi might be useful to her after all, and that she would be able to choose a suitable and appropriate tool or language on the Pi, which is not an option with Arduino. She also discussed ideas for creative projects and wearables which were really interesting and I told her all about Rachel’s project Zoe Star and put her in touch with Rachel, Charlotte and Amy. Dan took Meg and me out to dinner and we had a great time.
Mon 18 – Boulder, Colorado
Dan offered to put me up and show me around Denver the following day – I’d originally planned to get straight off to Utah the next day but it made sense to have an extra day in Denver – I’m glad I did as I really enjoyed the town and got to have a great chilled out day before driving again. We drove up one of the nearby mountains to a height of almost 10,000 feet.
I wandered around Boulder, a wonderful town full of cafes, restaurants and interesting shops. I ended up buying most of my awful souvenirs there – including a three-tiered monkey statue for Liz:
We ate at a restaurant called Fork so it seemed appropriate to get a picture for my Git/GitHub advocacy!
Colorado seemed to be the most recognisable state in all the places I visited, by which I mean it was culturally closest to Britain. My accent didn’t seem too far from theirs, either. A really nice place with great food and culture, with mountains and rivers right on hand. I could live in a place like that!
Tue 19 – Provo, Utah
I left Dan’s in the morning and headed West along the I-70 again. After a couple of bathroom breaks I got on some McDonald’s WiFi and checked my email and twitter – I’d had a tweet asking if I would be up for speaking in Provo that night. I thought “why not?” and said yes – expecting to arrive by 7pm, I suggested they make it 8pm just in case. I was actually heading to Provo already, in hope of meeting up with some family friends, Ken and Gary, who I stayed with last time I visited Utah. I hadn’t managed to get hold of them yet, but I kept ringing every now and then to see if they were around. When I finally got hold of them, they asked if they could come to see my presentation – so I told them where it was and said I’d see them there.
As I entered Utah the scenery got more and more beautiful – I pulled up a few times to get pictures. The moment I passed the ‘Welcome to Utah’ sign I realised what a huge feat I’d accomplished, and as I started to see signs to Salt Lake City – my end point – I was overjoyed. I hadn’t covered much distance across the country in my first week, as I’d gone South, along a bit, North and East a bit before finally setting off from St. Louis in the direction of the West Coast, so finally starting to see the blue dot on my map look a lot closer to California meant a lot.
I arrived in Provo about 7.30, located the venue, the Provo Web Academy, and by the time I found the right place and parked up it was 8pm. I was greeted by the event organiser, Derek, and my friends Ken and Gary! I hadn’t seen them for 13 years so it was a pleasure to meet again. I set up my presentation and gave my talk, had some great questions and inspired the group of about 20 (not bad, to say it had been organised just a few hours earlier) to make cool things with Pi and teach others to do the same. I went out to eat with Ken and Gary and caught up with them.
Wed 20 – Logan, Utah
The next day I had my talk planned for 4pm in Logan (North of Salt Lake City) so I had all morning free to spend with Ken (retired) while Gary was at work. Back story: my Mum (a primary school teacher) spent a year at a school in Utah in 1983-84 on an exchange programme. Ken was a fellow teacher at the school, and like many others, including families of the kids she taught, she kept in touch with him. As I said, we visited in 2001 while on a family holiday, and stayed with them on their farm. So Ken and I went to the school – obviously many of the staff there knew Ken as he only recently retired, and he told them all about my Mum and that I was touring America and wanted to visit the school. None of the teachers there were around in 1984, but some of the older ones remembered hearing about the English teachers who came that year. I took photos of the school and my Mum’s old classroom and sent them to her. We visited another teacher from that time who knew all about me from my Mum’s Christmas letter (yikes!) and even went to see the trailer my Mum lived in for the year!
I then left Provo for Logan, where the talk was to take place at Utah State University. I’d prepared a talk for university students, really, but discovered there was a large proportion of children there from a makers group for getting kids in to tech hardware projects – but they seemed to follow along and get some inspiration from the project ideas. Down to my last two Pis, I did what I did at most events and called out for the youngest people in the room – these went to 5 and 7 year olds, and my demo Babbage (I mention Dave Akerman’s Space Babbage in all my talks) was given out to a family too.
My final talk was recorded, but they told me they were recording the other screen so I’m out of the frame in most of the video.
Happy to have completed the tour, sad for my journey to be coming to and end, but glad to be able to sit down and take a breather, I chilled out for a while before heading back to Provo for my final night in America. I thought at one point I wouldn’t make it back as I hit a storm on my way home, and could barely see the road in front of me due to the incredible rain. The entire 4-lane freeway slowing to 40mph with high beams glaring, catching a glimpse of the white lines now and then and correcting the wheel accordingly, I made it home safely to join Ken and Gary for dinner.
Thu 21 – Salt Lake City, Utah
I bid farewell and left for the airport, returned my hire car with 4272 miles on it – which was 10% of the car’s overall mileage!
I flew from Salt Lake City to New York and stupidly forgot to tell them that wasn’t my final destination so I had to retrieve my suitcases at JFK baggage claim and check them back in for my next flight – because, you know, I like stress. Luckily I had no problems despite the internal flight running late and me not having a boarding card for my second flight (I had no access to a printer or WiFi in the 24 hours before the flight!), my luggage and all was successfully transported back to London with me. I was driven back to Cambridge, then up to Sheffield where I bought a suit, had my hair cut and attended the wedding of two great friends – Congratulations, Lauren and Dave.
What did I learn?
- Despite sales of Pis in America being the biggest in the world, the community is far less developed than it is in the UK and in other parts of Europe. There are hardly any Jams or user groups, but there is plenty of interest!
- American teachers want (and need) Picademy – or some equivalent training for using Pis in the classroom.
- There is a perception that Raspberry Pi is not big in America (due to lack of community), and assumption Pis are hard to buy in America. While this is still true in many hardware stores (though people should bug stores not selling Pi and accessories to start stocking stuff!), I refer people to Amazon, Adafruit and our main distributors Element14 and RS Components. You can also buy them off the shelf at Radioshack.
- If you build it, they will come. Announcing that I would turn up to a hackspace on a particular day brought people from all walks of life together to talk about Raspberry Pi, in much the same way a Raspberry Jam does in the UK. I could stand in front of these people and make them realise there is a community – they’re sitting in the middle of it. All they need is a reason to meet up – a Jam, a talks night, an event, a hack day, a tech club. It’s so easy to get something started, and you don’t need to start big – just get a venue and some space, tell people to turn up with Pis and take it from there.
Huge thanks to all the event organisers, the people who put me up for the night or took me out for a meal, and everyone involved in this trip. Sorry if I didn’t make it to you this time around – but I have a map and list of places we’re required – so we hope to cover more ground in future.
You can view the last iteration of my talk slides at slideshare.
Quite an epic post, thanks for the story! I hope your voice has recovered.
Raspberry Pi Staff Liz Upton
Sadly, it has. :P
Great and interesting tour!
“a mighty Nissan Altima”, “a big American car”, Nissan isn’t Japanese anymore? :) Sadly, now they’re linked with Renault :(
Raspberry Pi Staff Liz Upton
The gag is that they don’t sell those models here in Europe or in Japan; they’re US only cars, so yes, they are big American cars. Made by a Japanese firm!
I can’t believe i read the whole thing! great post and lives up to the name of Mega Tour!
Was Megatour one of the bad guys in Power Rangers? ;)
Raspberry Pi Staff Liz Upton
Very possibly; it seems there are enough Power Rangers to populate a small town. http://en.wikipedia.org/wiki/List_of_Power_Rangers
alex eames (RasPi.TV)
Wow. I think that’s the longest blog post I’ve ever read on here. Epic journey, great post. Well done.
I only wish I’d been able to attend one… Someday… And next time you’ll know to get throat lozenges! I used to have a job requiring that I talk to a thousand people a day, in small groups, so I know what it is like. At least I didn’t have to travel…
Epic tale Ben about an epic journey. Well done Ben!
request for visit and tour in europe
This. We should do this.
Hey! I’m kind of famous now!
Actually, I would like to see a gallery of all the selfies – it might make for an interesting art exhibit.
Ben Nuttall — post author
I intended to render them in to an animated GIF but didn’t get around to it (yet).
Reached the end! Reached the end! :-)
Sounds like you had a brilliant time, Ben, and lots of good ol’ American hospitality. :-)
Patrick Van Oosterwijck
Thanks again for the visit to Tinkermill in Longmont CO, Ben!
Great tale, Ben.
Next time take a more northerly route and compare!
The BBQ is not as good in Toronto but there are always tradeoffs.
Ben, I feel so fortunate to have learned of your visit to Atlanta only hours before your presentation and wish to thank GeekSpace Gwinnett for hosting.
Please, please: promise me that you’ll let me know in advance the next time there is a tour scheduled, or a Raspberry pi ambassador is in Atlanta. I would like to arrange an introduction for some of the school children in my neighborhood.
Ben Nuttall — post author
Thanks Tal, it was a great meetup! Keep an eye on the blog in future was that’s how we announce our trips – next visit might be the North states, or the West Coast, so I can’t promise that we’ll be back in Atlanta soon – but definitely want to help set up more community events in America.
Did you see Geekspace have set up a regular Raspberry Pi meetup?
I used to travel a lot on business in my younger days, but that would punish me too much!
Splendid advocacy for the Foundation. (Pity about the ‘selfies’, tho’ ;)