Raspberry Pi Learning Resources

What you will need

Hardware

As well as a Raspberry Pi with an SD card and the usual peripherals, you'll also need:

  • 1 x LED
  • 1 x 330 ohm resistor
  • 4 x Female-to-female jumper leads

Software

To prepare for this resource, you'll need an up-to-date SD card image. See the updating Raspbian guide.

You'll also need the following additional software installed:

For information on installing these libraries, see the software installation page.

Extras

You'll also need:

  • Cardboard tube
  • Plasticine or Blu-tack
  • Glue or Sellotape
  • Pencil
  • Sheet of A4 paper
  • Colouring pencils
  • Scissors