Posts: 144
Joined: Mon Nov 11, 2013 8:12 pm
Location: Berlin

BerryBoot, CPU temperature and powered USB

Sun Aug 31, 2014 5:44 am

My SD card got corrupted several times because I am running motion on my Raspberry and constantly reading and writing on my card (64GB SanDisk). SanDisk told me that although they are replacing the card I am using it not for the purpose it was built. So I replaced my OS with BerryBoot and I plugged a 64GB Transcend USB stick into my raspberry. Hopefully, that system will be more stable.

I have two questions to my colleagues:

1) I noticed that with a USB stick the CPU temperature is almost 7-10 degree Celsius higher than with the OS on the SD card. Did anyone observe something similar?

2) I am planning another raspberry with flightradar24-support, wifi and USB stick. So I need a USB Hub. I believe I should use a powered hub - any experiences with that? Is USB-3.0 necessary?
raspberry B, Noir camera, Mac Book Air, iPhone, Bezzera

Raspberry Pi Engineer & Forum Moderator
Raspberry Pi Engineer & Forum Moderator
Posts: 26868
Joined: Sat Jul 30, 2011 7:41 pm

Re: BerryBoot, CPU temperature and powered USB

Sun Aug 31, 2014 8:55 am

If you get a B+, you may not need the hub....
Principal Software Engineer at Raspberry Pi (Trading) Ltd.
Contrary to popular belief, humorous signatures are allowed.
I've been saying "Mucho" to my Spanish friend a lot more lately. It means a lot to him.

Return to “Troubleshooting”