Hi guys
I have a problem with my pi, it's could be me or software or hardware....
I have installed the NOOBZ SD install from the raspberry pi website
And fitted it with a WL-700n-rxs wireless dongle.
But when I go to WPA_GUI there are no adapters! And it says couldn't get status form supplicant
I have 512mb Model B
Running Linux 3.6.11 #1 preempt
When I type in lsusb I get
Bus 001 device 002: ID 0424:9512 Standard
Microsystems Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 0424:ec00 Standard Microsystems Corp
Bus 001 Device 004: ID 148f:7601 Ralink Technology, Corp
Bus 001 Device 005: ID 04d9:a01c Holtek semiconductor, inc.
It looks like it sees the module.
Any ideas? I've followed a few tutorials to set up wpa_supplicant.conf but all settings seem correct!
Thanks in advance!