Keyboard Issues

[TLHroolz]

I have got the latest Raspberry Pi (Debian GNU/ Linux Wheezy) and my keyboard frustratingly won't work.
After reading some articles I have checked the power output and it is at a perfect level (5.2V) and the keyboard I use is in the list of compatible USB keyboards (Dell SK - 8115 100mA).
I'm stuck on the first screen asking for the login and the keyboard just won't do anything!!!
No lights on it or anything...

[Wheel_nut]

Where are you measuring the Voltage at 5.2V ? Try measuring it between TP1 and TP2 on the RPi Board and post the reading here.

I suspect that you have excessive voltage drop either in your MicroUSB Cable or the F3 Polyfuse or both.

[TLHroolz]

Where are you measuring the Voltage at 5.2V ? Try measuring it between TP1 and TP2 on the RPi Board and post the reading here.

I suspect that you have excessive voltage drop either in your MicroUSB Cable or the F3 Polyfuse or both.

I did take this reading between TP1 and TP2...
I also tried different MicroUSB cables. Still did not work.

[Wheel_nut]

By "I have got the latest Raspberry Pi (Debian GNU/ Linux Wheezy) " do you mean that you have Raspian Wheezy 2012/12/16 as downloaded from this site?