plugwash
Forum Moderator
Forum Moderator
Posts: 3418
Joined: Wed Dec 28, 2011 11:45 pm

Re: FreeCAD on PI4 and Raspbian Buster.

Sat Jul 13, 2019 11:10 pm

I didn't try to actually do anything, I just loaded the GUI, I thought that was what at least some people were having trouble with.

User avatar
Gavinmc42
Posts: 3172
Joined: Wed Aug 28, 2013 3:31 am

Re: FreeCAD on PI4 and Raspbian Buster.

Sun Jul 14, 2019 12:32 am

I didn't try to actually do anything, I just loaded the GUI, I thought that was what at least some people were having trouble with.
Nope the GUI is fine now, we can sit and stare at it for ages :D
It is just when you create a new file it crashes and vanishes.
I'm dancing on Rainbows.
Raspberries are not Apples or Oranges

User avatar
framboise_314
Posts: 18
Joined: Tue Aug 21, 2012 1:04 pm
Location: Le Creusot - France
Contact: Website

Re: FreeCAD on PI4 and Raspbian Buster.

Sun Jul 14, 2019 3:48 pm

hello
same trouble here
GUI launch ok Click New and oups GUI is gone away
regards
framboise314

thrustpork
Posts: 10
Joined: Sat Jul 06, 2019 12:49 am

Re: FreeCAD on PI4 and Raspbian Buster.

Tue Jul 16, 2019 4:27 pm

Any news on this? FreeCAD is the last piece of the puzzle for me after switching my desktop out for a Pi4. I managed to get slic3r working, just need my handy CAD program to get back to 3D printing useless stuff. :)

jamesh
Raspberry Pi Engineer & Forum Moderator
Raspberry Pi Engineer & Forum Moderator
Posts: 22733
Joined: Sat Jul 30, 2011 7:41 pm

Re: FreeCAD on PI4 and Raspbian Buster.

Tue Jul 16, 2019 5:30 pm

Has this been reported to Freecad? They are probably best placed to figure out what the problem is.
Principal Software Engineer at Raspberry Pi (Trading) Ltd.
Contrary to popular belief, humorous signatures are allowed. Here's an example...
"My grief counseller just died, luckily, he was so good, I didn't care."

fruitoftheloom
Posts: 19810
Joined: Tue Mar 25, 2014 12:40 pm
Location: Delightful Dorset

Re: FreeCAD on PI4 and Raspbian Buster.

Tue Jul 16, 2019 5:38 pm

jamesh wrote:
Tue Jul 16, 2019 5:30 pm
Has this been reported to Freecad? They are probably best placed to figure out what the problem is.

https://forum.freecadweb.org/viewtopic.php?f=42&t=37458


https://forum.freecadweb.org/viewtopic.php?f=12&t=37314
adieu

My other Computer is an Asus CS10 ChromeBit running Chrome Operating System.
HP Envy 4500 Wireless Printer supported by HPLIP software in Raspbian Buster.
Raspberry Pi Model 2B v1.1

jamesh
Raspberry Pi Engineer & Forum Moderator
Raspberry Pi Engineer & Forum Moderator
Posts: 22733
Joined: Sat Jul 30, 2011 7:41 pm

Re: FreeCAD on PI4 and Raspbian Buster.

Tue Jul 16, 2019 5:55 pm

fruitoftheloom wrote:
Tue Jul 16, 2019 5:38 pm
jamesh wrote:
Tue Jul 16, 2019 5:30 pm
Has this been reported to Freecad? They are probably best placed to figure out what the problem is.
https://forum.freecadweb.org/viewtopic.php?f=42&t=37458

https://forum.freecadweb.org/viewtopic.php?f=12&t=37314
Those threads are about as much use as chocolate teapot.
Principal Software Engineer at Raspberry Pi (Trading) Ltd.
Contrary to popular belief, humorous signatures are allowed. Here's an example...
"My grief counseller just died, luckily, he was so good, I didn't care."

User avatar
jbeale
Posts: 3439
Joined: Tue Nov 22, 2011 11:51 pm
Contact: Website

Re: FreeCAD on PI4 and Raspbian Buster.

Tue Jul 16, 2019 6:43 pm

Is this relevant to the issue?
FreeCAD crashes on creating a new document or opening a file
https://www.freecadweb.org/wiki/FAQ#Fre ... ing_a_file

plugwash
Forum Moderator
Forum Moderator
Posts: 3418
Joined: Wed Dec 28, 2011 11:45 pm

Re: FreeCAD on PI4 and Raspbian Buster.

Tue Jul 16, 2019 7:01 pm

jbeale wrote:
Tue Jul 16, 2019 6:43 pm
Is this relevant to the issue?
FreeCAD crashes on creating a new document or opening a file
https://www.freecadweb.org/wiki/FAQ#Fre ... ing_a_file
Doesn't look like it, everything seems to be built against the same version of libCoin.

thrustpork
Posts: 10
Joined: Sat Jul 06, 2019 12:49 am

Re: FreeCAD on PI4 and Raspbian Buster.

Tue Jul 16, 2019 7:04 pm

That looks promising

User avatar
Gavinmc42
Posts: 3172
Joined: Wed Aug 28, 2013 3:31 am

Re: FreeCAD on PI4 and Raspbian Buster.

Wed Jul 17, 2019 2:36 am

Anyone tried building from source?

I had to do a dist-upgrade to fix the Buster release/stable issue and just installed freecad again.
Same issue starts up and then disappears when "creating new"

Got this message, looks like a OpenGL error?

Code: Select all

freecad
FreeCAD 0.18, Libs: 0.18R
© Juergen Riegel, Werner Mayer, Yorik van Havre 2001-2019
  #####                 ####  ###   ####  
  #                    #      # #   #   # 
  #     ##  #### ####  #     #   #  #   # 
  ####  # # #  # #  #  #     #####  #   # 
  #     #   #### ####  #    #     # #   # 
  #     #   #    #     #    #     # #   #  ##  ##  ##
  #     #   #### ####   ### #     # ####   ##  ##  ##

Coin warning in cc_glglue_instance(): Error when setting up the GL context. This can happen if there is no current context, or if the context has been set up incorrectly.
Program received signal SIGSEGV, Segmentation fault.
#0  /lib/arm-linux-gnueabihf/libc.so.6(__default_sa_restorer+0) [0xb344d120]
That link had the freecad --write -log info and this is the end of the log file.

Code: Select all

Log: Init: Loading FreeCAD GUI
Log: D-Bus global menu: no
Log: Init: Running FreeCADGuiInit.py start script... done
Log: Init: Activating default workbench StartWorkbench
Log: Loading GUI of Web module... done
Log: Loading GUI of Start module... done
Log: Loading Start module... done
Log: D-Bus system tray: no
Log: Init: Showing main window
Log: Main window restored
Log: Show main window
Log: Toolbars restored
Log: Couldn't connect to spacenav daemon
Log: Init: Entering event loop
Log: Init: Processing command line files
Err: Program received signal SIGSEGV, Segmentation fault.
Err: #0  /lib/arm-linux-gnueabihf/libc.so.6(__default_sa_restorer+0) [0xb344e120]
I'm dancing on Rainbows.
Raspberries are not Apples or Oranges

Return to “Raspbian”