-
JSmith1717
- Posts: 3
- Joined: Wed Oct 03, 2018 2:45 pm
Replacing HDMI port Pi 3 B+
Was wondering if the HDMI port could be replaced with a 0.5mm 19 pin fpc connector? Like the adaptors you can get for the HDMI to fpc cable but I want it directly on the board.
-
JSmith1717
- Posts: 3
- Joined: Wed Oct 03, 2018 2:45 pm
Re: Replacing HDMI port Pi 3 B+
Looks like it will work in Eagle, pinouts are backwards but that doesnt matter
- Attachments
-
- Screenshot (1).png (35.08 KiB) Viewed 643 times
-
aBUGSworstnightmare
- Posts: 1226
- Joined: Tue Jun 30, 2015 1:35 pm
Re: Replacing HDMI port Pi 3 B+
It's 0.5mm pin pitch, so why shouldnt it work? Pin assignment should also be no issue as you will need a custom adapter for the other end of the FPC
-
JSmith1717
- Posts: 3
- Joined: Wed Oct 03, 2018 2:45 pm
Re: Replacing HDMI port Pi 3 B+
Well the other end will be going to a pcb I'm building for a portable retropie system