RasPiNewbie00
Posts: 1
Joined: Sun Aug 12, 2018 10:19 pm

Display the same image on two monitor

Sun Aug 12, 2018 10:38 pm

Hi everyone !


I would like to display the video of a camera on two (ideally around 3.2") screens simultaneously (so basically they display the same image at the same time). I already own the camera but I can't figure how I could achieve that. Maybe I could solder the data pins of two display ? Honestly I have no idea.

I don't have a lot of space in my application so HDMI-free is preferable. Anyway any solution will be fine. In addition could you guys advise me on the monitors to buy? (as I said ideally around 3.2inches and no-touch?)

Thank you, a new Raspi User

HermannSW
Posts: 717
Joined: Fri Jul 22, 2016 9:09 pm

Re: Display the same image on two monitor

Tue Aug 14, 2018 3:52 pm

I used two 2.2" displays with ili9341 SPI controller (no touch), you can get 2.8" version as well:
viewtopic.php?f=43&t=193722#p1217930
Image


You can find all information needed in that thread. As the photo shows, displays are /dev/fb1 and /dev/fb2. You can use tee element in gstreamer pipeline to duplicate your video and send one to each display (with fbdevsink).
--> Raspberry camera / gstreamer / raspivid / raspiraw (bookmark list):
https://stamm-wilbrandt.de/en/Raspberry_camera.html

https://github.com/Hermann-SW/fork-raspiraw      https://github.com/Hermann-SW/userland      https://twitter.com/HermannSW

Return to “General discussion”

Who is online

Users browsing this forum: 6by9, allfox, drgeoff and 47 guests