Recommendation For A Screen

[Shaked97]

Hi Everyone,
I'm doing project with the raspberry pi (I work with the raspbian from noobs) and for the project I ordered a touch screen from company that name "Waveshare".
The screen doesn't work well with the noobs so I need a recommendation for a HDMI 5" touch screen the perfectly fit for the noobs system.
Thanks,
Shaked.

[W. H. Heydt]

Unless there is some particular feature of NOOBS you actually need (such as switching OSes), then you'd be better off to write a direct image file to your SD card and not use NOOBS at all. As for screens, the only one that I would expect to work "out of the box" is the RPF 7" touch screen that connects to a Pi through the DSI connector. Support for that screen is "baked in" to the binary blob that boots the VC4.

[OutoftheBOTS]

I tend to use this 5" for straight plug and play. It runs the screen of standard HDMI port and RPi should auto detect it using a NOOBS install then the touch part works like a standard plug and play USB mouse and again the RPi should auto detect it for plug and play.

https://www.aliexpress.com/item/30fps-5 ... autifyAB=0

[Shaked97]

Unless there is some particular feature of NOOBS you actually need (such as switching OSes), then you'd be better off to write a direct image file to your SD card and not use NOOBS at all. As for screens, the only one that I would expect to work "out of the box" is the RPF 7" touch screen that connects to a Pi through the DSI connector. Support for that screen is "baked in" to the binary blob that boots the VC4.

I already write my all project software that include fingerprint protocol and graphical algorithm so I need the screen for noobs...