component parts list

[richbere]

Hi all
This is my 1st post here, i'm looking to see if anyone knows where I can get a service manual for the pi 3 main board or component parts list. My pi 3 has a bad(broken) micro sd card holder and i'm trying to replace it but don't know the part number to order a new one. Its my handycaped daughter"s and I pushed the card in to far and lifted the metal part of the holder up and the card will not seat in the holder.

Thanks
richbere

[klricks]

Hi all
This is my 1st post here, i'm looking to see if anyone knows where I can get a service manual for the pi 3 main board or component parts list. My pi 3 has a bad(broken) micro sd card holder and i'm trying to replace it but don't know the part number to order a new one. Its my handycaped daughter"s and I pushed the card in to far and lifted the metal part of the holder up and the card will not seat in the holder.

Thanks
richbere

There is no service manual or published parts list (BOM).
However you might be able to find a replacement by searching Element14 or RS or other supplier.

[richbere]

ok thank you very much

richbere

[mahjongg]

I think is a Molex 503398-1892, I'm not sure though if they are still using that one, but you might order one and visually compare, or download the datasheet, and use that to compare.

Farnell sells them, see http://uk.farnell.com/molex/503398-1892 ... m%2Fsearch

P.S. this is the old push to eject type, so it might not fit your board.

I would search farnell for one that is pull to eject, and looks like the one on the board.

good luck!