I've got an issue since few days. I've got a Raspberry Pi 3, connected to Eduroam network thanks to the built-in AP Wi-Fi module. I want to get an Access Point with a Realtek adapter.
I saw that the power supply could be a problem so I put the adapter on a screen and link it with a cable (it should deliver enough power). For the features, I've followed this website http://elinux.org/RPI-Wireless-Hotspot
Also, I saw a very similar issue on the forum viewtopic.php?f=28&t=89756 , but I've already solve the power supply issue... So I've got no more idea to solve my issue.
I've got Raspbian 2017-04-10.
The iwconfig command says :
Code: Select all
pi@raspberrypi:~ $ iwconfig
eth0 no wireless extensions.
wlan0 IEEE 802.11 ESSID:"eduroam"
Mode:Managed Frequency:2.412 GHz Access Point: A0:CF:5B:0E:F6:33
Bit Rate=24 Mb/s Tx-Power=31 dBm
Retry short limit:7 RTS thr:off Fragment thr:off
Power Management:on
Link Quality=38/70 Signal level=-72 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:4 Invalid misc:0 Missed beacon:0
lo no wireless extensions.
wlan1 unassociated Nickname:"<WIFI@REALTEK>"
Mode:Auto Frequency=2.412 GHz Access Point: Not-Associated
Sensitivity:0/0
Retry:off RTS thr:off Fragment thr:off
Power Management:off
Link Quality:0 Signal level:0 Noise level:0
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0Thanks for your help
