Hey so I'm designing a case and am hoping to mount the case directly onto a wall outlet. I can't seem to find any products that would allow this. Basically I would need to make the power supply prongs stationary to the case.
Any suggestions?
Re: Wall Outlet Case
Which country do you live in?
As I'm sure you know, mains sockets are by no means universal.
(neither are the regulations about building this type of device)
As I'm sure you know, mains sockets are by no means universal.
(neither are the regulations about building this type of device)
Electronic and Computer Engineer
Pi Interests: Home Automation, IOT, Python and Tkinter
Pi Interests: Home Automation, IOT, Python and Tkinter
-
ElEscalador
- Posts: 839
- Joined: Tue Dec 15, 2015 4:55 pm
- Location: Detroit, MI USA
- Contact: Website
Re: Wall Outlet Case
1. Find product (hopefully in your junk bins) that plugs into outlet.
2. Take the guts out except what you need.
3. Put your guts into now empty case.
2. Take the guts out except what you need.
3. Put your guts into now empty case.
Robotics tips, hacks, book extras https://youtube.com/practicalrobotics
Re: Wall Outlet Case
If you're meaning something like this https://www.min.at/prinz/?entry=entry150323-165443 then add to the list:
4. Turn on the switch and burn your house down.
5. Remain homeless when the insurance refuses to pay out.
4. Turn on the switch and burn your house down.
5. Remain homeless when the insurance refuses to pay out.