Hello everyone,
I have for some time tried to manage to connect a JVC KW-V51BT to my rasperry with no great success.
The head unit in my car supports MHL on for example a Sony Z3 where I get the phone display on the 7" touch screen in my car. It also connects to the touch function of the screen so I can control the entire phone from the car stereo display.
My issue.
I can connect the raspberry pi to the Bluetooth of the JVC headunit but it doesn´t connect to all of the functions. At the moment this is what I have succeeded to connect to:
Device C8:02:XX:A2:XX:EC
Name: JVC KW-V
Alias: JVC KW-V
Class: 0x340408
Icon: audio-card
Paired: yes
Trusted: yes
Blocked: no
Connected: no
Legacypairing: no
UUID: Vendor specific (00000000-deca-fade-deca-deafdecacafe)
UUID: Serial Port (00001101-0000-1000-8000-00805f9b34fb)
UUID: OBEX Object Push (00001105-0000-1000-8000-00805f9b34fb)
UUID: Audio Sink (0000110b-0000-1000-8000-00805f9b34fb)
UUID: A/V Remote Control (0000110e-0000-1000-8000-00805f9b34fb)
UUID: Handsfree (0000111e-0000-1000-8000-00805f9b34fb)
UUID: Human Interface Device... (00001124-0000-1000-8000-00805f9b34fb)
UUID: Message Notification Se.. (00001133-0000-1000-8000-00805f9b34fb)
UUID: PnP Information (00001200-0000-1000-8000-00805f9b34fb)
Modalias: usb:v2166p0082d0100
[CHG] Device C8:02:XX:A2:XX:EC Connected: yes
[CHG] Device C8:02:XX:A2:XX:EC Connected: no
[bluetooth]#
Is there a way to connect to HID within the JVC, like the HID marked above, or will it be just audio as the pi currently connects to it.
Secondary problem, it connects then disconnects if it is idling how can I the pi to allow idling ?
any thoughts are good ones..