connect 26 pin lcd to raspberry pi


4 posts
by kingraj » Wed Feb 15, 2017 3:48 pm
hi guys , am new to this forum and also to raspberry pi . I want to know if i can connect raspberry pi 3 to my 7inch non-touch lcd display with 26pins . i need to know how to make connections, is there any way to connect it. I am attaching the 7inch lcd images. Guys plz help. :) :)
Attachments
b.jpg
26pin connector
b.jpg (53.1 KiB) Viewed 276 times
a.jpg
lcd connector
a.jpg (58.45 KiB) Viewed 276 times
Posts: 2
Joined: Wed Feb 15, 2017 3:05 pm
by alphanumeric » Wed Feb 15, 2017 3:53 pm
Google the part number of the screen and look for a driver board. Preferable one with an HDMI input.
Posts: 613
Joined: Tue Jan 19, 2016 2:17 pm
by kingraj » Fri Feb 17, 2017 3:21 pm
There is no part number written on it.Actually i found this screen inside an mini portable dvd player .
Posts: 2
Joined: Wed Feb 15, 2017 3:05 pm
by pavul » Fri Feb 17, 2017 3:39 pm
if was inside dvd player then u have to look for that dvd and see what kind of screen it have,
If is something like generic chinesse monitor then probably can accept the same drivers for saintsmart or waveshare.

you could try downloading the images from these providers and after install to rpi, try to change the output to your screen

//go to directory
cd LCD-show
//then execute the command
sudo ./LCD-7inch
//don't remember but must be a script for the screen of your inches.
Posts: 13
Joined: Wed Jan 18, 2017 4:13 am