Hi all,
I have a raspberry 3 with latest NOOB and all updates installed.
I would like to connect it to my JVC KW-V51 car stereo and use the touch screen on it.
HDMI works perfect no issues but it fails to connect to the HID ( see details below)
The HID is the interface used using MHL to get the touchscreen function using Android phones.
I can get the Raspberry pi 3 to connect as an BT audio device, but it doesnt recognize the HID in the car stereo.
Because of this I cannot use the touchscreen in the carstereo which is of course my intention.
I have ran out of ideas does anyone here know how to load BT HID profile manually ?
Device C8:XX:XX:XX:XX:XX
Name: JVC KW-V
Alias: JVC KW-V
Class: 0x340408
Icon: audio-card
Paired: yes
Trusted: yes
Blocked: no
Connected: no
Legacypairing: no
UUID: Vendor specific (00000000-deca-fade-deca-deafdecacafe)
UUID: Serial Port (00001101-0000-1000-8000-00805f9b34fb)
UUID: OBEX Object Push (00001105-0000-1000-8000-00805f9b34fb)
UUID: Audio Sink (0000110b-0000-1000-8000-00805f9b34fb)
UUID: A/V Remote Control (0000110e-0000-1000-8000-00805f9b34fb)
UUID: Handsfree (0000111e-0000-1000-8000-00805f9b34fb)
UUID: Human Interface Device... (00001124-0000-1000-8000-00805f9b34fb)
UUID: Message Notification Se.. (00001133-0000-1000-8000-00805f9b34fb)
UUID: PnP Information (00001200-0000-1000-8000-00805f9b34fb)
Modalias: usb:v2166p0082d0100