Cylarcy
Posts: 11
Joined: Fri Oct 05, 2012 11:50 pm

Huawei & Jessie

Thu Jun 02, 2016 11:24 am

Hi guys,

I am trying to use my Huwaei 3g stick which was working fine on Rasbian on Jessie and i am having problems.

When i plug it in the eth0 goes down and after a bit it comes up again.

the output from dmesg is below

Code: Select all

[  314.651109] usb 1-1.2: new high-speed USB device number 77 using dwc_otg
[  314.752102] usb 1-1.2: New USB device found, idVendor=12d1, idProduct=15d4
[  314.752114] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  314.752121] usb 1-1.2: Product: HUAWEI Mobile
[  314.752127] usb 1-1.2: Manufacturer: HUAWEI
[  314.752134] usb 1-1.2: SerialNumber: FFFFFFFFFFFFFFFF
[  314.810007] usb-storage 1-1.2:1.0: USB Mass Storage device detected
[  314.810217] scsi host54: usb-storage 1-1.2:1.0
[  315.448521] usb 1-1.2: usbfs: interface 0 claimed by usb-storage while 'usb_modeswitch' sets config #2
[  315.781238] usb usb1-port1: disabled by hub (EMI?), re-enabling...
[  315.781272] usb 1-1: USB disconnect, device number 75
[  315.781287] usb 1-1.1: USB disconnect, device number 76
[  315.781603] smsc95xx 1-1.1:1.0 eth1: unregister 'smsc95xx' usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet
[  315.781661] smsc95xx 1-1.1:1.0 eth1: hardware isn't capable of remote wakeup
[  315.831930] usb 1-1.2: USB disconnect, device number 77

I have no idea what is happening as this was working fine before upgrading to the new version.
any help pls

DirkS
Posts: 10363
Joined: Tue Jun 19, 2012 9:46 pm
Location: Essex, UK

Re: Huawei & Jessie

Thu Jun 02, 2016 11:51 am

Cylarcy wrote:I am trying to use my Huwaei 3g stick which was working fine on Rasbian on Jessie and i am having problems.
<snip>
I have no idea what is happening as this was working fine before upgrading to the new version.
What new version? Current version is still Raspbian Jessie...

On what model Pi does this happen?
Does the power LED go off when you plug it in?
Do you get the same messages when you power up the Pi with the 3G modem plugged in?

Cylarcy
Posts: 11
Joined: Fri Oct 05, 2012 11:50 pm

Re: Huawei & Jessie

Thu Jun 02, 2016 12:14 pm

Model is Rpi 3 with Raspbian Jessie

The led does not go off on the Pi. The 3g stick led begins blinking and the same message appears even if i reboot with the stick in.

DirkS
Posts: 10363
Joined: Tue Jun 19, 2012 9:46 pm
Location: Essex, UK

Re: Huawei & Jessie

Thu Jun 02, 2016 12:17 pm

So on which version did it work and with which version did it stop working?

Cylarcy
Posts: 11
Joined: Fri Oct 05, 2012 11:50 pm

Re: Huawei & Jessie

Thu Jun 02, 2016 1:05 pm

it worked right before the Jessie release so the one available 2-3 months ago not sure about the name.

3 weeks ago i downloaded Jessie from the official page and it doesnt work

Return to “Troubleshooting”