NOOBS WiFi

[SamDoesPi]

On NOOBS, I cannot seem to use WiFi, but on Raspbian it works, and on Ethernet, NOOBS works and shows the list of downloadable Operating Systems. Is there any workaround?
Wifi Adapter: http://www.amazon.co.uk/dp/B00GMY40T0/r ... UTF8&psc=1

[SamDoesPi]

bump

[kusti8]

bump

It is very rude to bump a topic after 30 min or a few hours. Your question is easily answered using Google

[TheAbleGeek]

So what's the easy answer kusti8? Because I've seen troubleshooting steps but nothing that's resolved this issue either.

[kusti8]

It's the default in NOOBS 1.9 for the Pi3, a WiFi icon on the toolbar.

[SamDoesPi]

I've tried that on a build from November, so I'll use this new one.

[TheAbleGeek]

I'm on 1.9, shows the WiFi icon in the upper right hand corner, I select my SSID and enter in my key. Shows connection and when I run ifconfig it shows my IP in wlan0 (192.168.2.1/24) but still not able to connect when I open a browser. (Page cannot display)

[procount]

@SamDoesPi noobs 1.9 only supports the rpi 3b built in wifi or the rpf broadcom wifi dongle.

[fruitoftheloom]

@SamDoesPi noobs 1.9 only supports the rpi 3b built in wifi or the rpf broadcom wifi dongle.

Where is the documentation stating this

https://github.com/raspberrypi/noobs/co ... 7d584ea0c4

[procount]

https://github.com/raspberrypi/noobs/pull/329

Or if you want to review the pull request I made:

https://github.com/procount/noobs/blob/readme/README.md

or more specifically for wifi:

https://github.com/procount/noobs/blob/ ... i-networks

I hope the NOOBS maintainers will merge these updates in soon