Canon 700d, gPhoto p2p

[BigBadWusty]

Hello,

Please excise me if this is poor form but I'm kind of stuck. I've been following guides to interface a Dslr to a Raspberry pi using gPhoto however the camera doesn't seem to be registered via usb... on LSUSB i get nothing... any ideas?> I'm pretty new to all this

[fruitoftheloom]

Hello,

Please excise me if this is poor form but I'm kind of stuck. I've been following guides to interface a Dslr to a Raspberry pi using gPhoto however the camera doesn't seem to be registered via usb... on LSUSB i get nothing... any ideas?> I'm pretty new to all this

The Canon EOS 700D is supported by gphoto / libgphoto2

http://www.canon.co.uk/for_home/product ... /eos_700d/

http://www.gphoto.org/proj/libgphoto2/support.php

https://packages.debian.org/wheezy/libgphoto2-2-dev


Please post output of lsusb with camera in mass storage mode when plugged in

[DougieLawson]

Is your camera in "USB media" mode or "USB MTP/PTP" mode? My Nikon wasn't recognised until I switched it to MTP/PTP mode.

[BigBadWusty]

The camera had no USB mode that i can find through the settings. On my mac it auto recognises without any mode selection... I may have missed it but i'm pretty certain there is no specific USB mode on the Canon camera...

Thank you for the response though

[BigBadWusty]

solved i used a different Pi a B+ and did a fresh setup using https://github.com/gonzalo/gphoto2-updater/ worked out the box. Don't know what was going on on the other B model Pi but who cares two extra ports for my project.