rcooke
Posts: 10
Joined: Wed Jul 22, 2015 1:01 am

PoE i/o board design?

Wed Jul 22, 2015 2:53 am

Has anybody seen an I/O board for the Compute Module that incorporates 10/100/1000 compatible Power over Ethernet to run the Pi?

I'm working on a project for a remote location that has PoE hub nearby. And I have to fit into a small space.

The CM size is fine. I just need to find an I/O board with PoE, USB, and the I/O header.

Or a reference design for PoE and the CM?

Thanks in advance!
Rich.

fruitoftheloom
Posts: 19521
Joined: Tue Mar 25, 2014 12:40 pm
Location: Delightful Dorset

Re: PoE i/o board design?

Wed Jul 22, 2015 4:46 am

rcooke wrote:Has anybody seen an I/O board for the Compute Module that incorporates 10/100/1000 compatible Power over Ethernet to run the Pi?

I'm working on a project for a remote location that has PoE hub nearby. And I have to fit into a small space.

The CM size is fine. I just need to find an I/O board with PoE, USB, and the I/O header.

Or a reference design for PoE and the CM?

Thanks in advance!
Rich.
This is a PCB for a standard RPi add on, it is unlikely you will find a ready made carrier board and will have to design / manufacture your own:

http://www.silvertel.com/component/cont ... i-poe.html

https://www.raspberrypi.org/documentati ... /README.md
adieu

My other Computer is an Asus CS10 ChromeBit running Chrome Operating System.
HP Envy 4500 Wireless Printer supported by HPLIP software in Raspbian Buster.
Raspberry Pi Model 2B v1.1

rcooke
Posts: 10
Joined: Wed Jul 22, 2015 1:01 am

Re: PoE i/o board design?

Wed Jul 22, 2015 12:00 pm

Great! Thanks for the link to that add on.

Cheers!


Return to “Compute Module”