Use spi monitor on raspberry pi

[MohamadCm]

Hi,
I've bought a 2.2 inch SPI monitor last week but i don't know how to use it.
Can anybody help me out
I've tried many guides,but the monitor still not working.

[DirkS]

We will need more info. Please give make, model.
Or links to the product, manual, datasheet.

[MohamadCm]

Ok.Here it is:
Specification:
Controller(Driver IC): ILI9341
Resolution: QVGA 240 x 320 Dots
PCB adapter for LCD
SPI serial 5 wires (CS, RS, SCL, SDA, RST) for controlling.
SDO: Serial clock output
LED: 3.4V Power Supply pin
SCL: Serial clock input
SDA / SDI: Serial data input
DC: Data / Command selection
RST: Reset, Low level active
CS: Chip Selection, Low level active
GND: Ground
VDD33: 3.3V Power Supply pin

Thank you

[DougieLawson]

That's supported by Notro's code.
https://github.com/notro/fbtft/wiki/LCD-Modules
https://github.com/notro/fbtft/wiki/LCD ... i0283qt-9a looks like a good match

[MohamadCm]

Hey guys,
I have connected my display using this guide:http://www.virtualfrontiers.co.uk/index_13.htm
But the thing is,It's stop at the screen below & I can do nothing.
What should i do?!!!

[MohamadCm]

SomeBody, AnyBody PLEASE HELP!

[DirkS]

SomeBody, AnyBody PLEASE HELP!

Screenshot (?) is not available anymore...

BTW: we really need more info on the display. Do you at least have a link to more information?
Even displays with the same chip can have a different setup...

[MohamadCm]

SomeBody, AnyBody PLEASE HELP!

Screenshot (?) is not available anymore...

BTW: we really need more info on the display. Do you at least have a link to more information?
Even displays with the same chip can have a different setup...

OH,
Ok,I've changed the link,
BTW :My Monitor is the same one with the guide.

[MohamadCm]

I need HELP

[MohamadCm]

Any help yet
?!

[MohamadCm]

Still wating

[sxk]

Hi there

I am not an expert either. However I managed to get one on the same monitor working. I used the pin out same as the virtual frontiers article.

Can you put a clear step by step prices of what you did including how you connected it?

I can compare this with my setup.

I put the steps I did here

http://rue16.com/read-thread.php?mxid=431

Thanks

[MohamadCm]

Hi there

I am not an expert either. However I managed to get one on the same monitor working. I used the pin out same as the virtual frontiers article.

Can you put a clear step by step prices of what you did including how you connected it?

I can compare this with my setup.

I put the steps I did here

http://rue16.com/read-thread.php?mxid=431

Thanks

So I tried to start from the beginning and use this guide, but right now when I start The Rpi The monitor just turns on and shows nothing.

[MohamadCm]

Need help!

[MohamadCm]

Hmmm...
Waiting!

[MohamadCm]

So i just saw the virtual frontier's note that added on may So i started from the begining of the new note and still the monitor turns on but it shows nothing
(just a blank white screen)