Posts: 9
Joined: Tue Apr 21, 2015 7:05 pm

Kinect Whit Raspberry Pi 2

Thu Apr 23, 2015 11:57 am

I am trying to run my xbox360 kinect on my raspberry pi 2. I have followed this guide ( )without errors but at the last command ( make load ) gives me this error:
root@raspberrypi:/home/pi/librekinect-master# ls
gspca.c gspca.h kinect.c Makefile
root@raspberrypi:/home/pi/librekinect-master# make load
make unload_drivers
make[1]: Entering directory '/home/pi/librekinect-master'
sudo sh
Error: Module kinect is not currently loaded
Error: Module gspca is not currently loaded
Error: Module gspca_main is in use by: gspca_kinect
Error: Module gspca_kinect is in use
Error: Module * is not currently loaded
make[1]: Leaving directory '/home/pi/librekinect-master'
sudo modprobe videodev
sudo insmod gspca.ko
Error: could not load module gspca.ko: No such file or directory
Makefile:42: recipe for target 'load' failed
make: *** [load] Error 1

User avatar
Posts: 39821
Joined: Sun Jun 16, 2013 11:19 pm
Location: A small cave in deepest darkest Basingstoke, UK
Contact: Website Twitter

Re: Kinect Whit Raspberry Pi 2

Thu Apr 23, 2015 2:20 pm

I've updated your github issue with some notes. I got this to build and load OK on my RPi2B.
Note: Any requirement to use a crystal ball or mind reading will result in me ignoring your question.

Criticising any questions is banned on this forum.

Any DMs sent on Twitter will be answered next month.
All fake doctors are on my foes list.

Posts: 6
Joined: Tue Mar 04, 2014 1:13 am

Re: Kinect Whit Raspberry Pi 2

Sun Mar 06, 2016 7:00 pm

As a Linux NOOB, I'm having a problem with the Librekinect install instruction. It seems to imply that I must build a new kernel. I have the Librekinect Master unzipped in my "Downloads" folder.

With "uname -r" to identify which kernel I'm using, it comes back with "4.1.13-V7+". Plugging this into the subsequent "wget https//..." returns "404 not found". How/where can I proceed from here?

Thanks for any assistance.

Return to “Troubleshooting”