Now as I am trying to build a low budget machine, I ended up ordering PS3 Gasia controller too. The file here below mention does not work for me. I have a RPI2 with recalbox uptodate and a CRS V4.0 Bluetooth dongle on which original ps3 controller works great. When I replace my sixad-sixaxis with the one from link below no controller will work. Even original ps3 dualshock will not connect. I have reboot and still not able to get any connection with that sixad-sixaxis.
Anything else I need to change?
Thank you for your support.
mattrix wrote:After a lot of trial and error, I managed to get my GASIA controllers working
There is 1x file that needs to be changed. /usr/sbin/sixad-sixaxis
For anyone else with these controllers, I have uploaded the working file here:
https://mega.co.nz/#!PMJ01ZLT!JHF4gFiqA ... 6XYidtpjG0
This is built from the source here:
(Only tested working in latest recalbox on RPI2)
Looking at the code, it may also work with official controllers and ShanWan controllers.
I have neither of these to test with. DigitalLumberJack did you maybe want to try swapping out the above file and test with the other controllers?
Also, I'm using a CSR Ltd Bluetooth Dongle (HCI mode) dongle - so again - strange it works.
Have tried with other BT dongles and same file above still works.
Only thing I notice is that the LED on both controllers always shows #1