Posts: 39
Joined: Fri Apr 04, 2014 11:23 pm

Raspberry pi problems

Thu Feb 19, 2015 1:37 pm

Guys, I have a raspberry pi controlling my system in a remote location. The surrounding temperature is around -11 degree celsius.
I am running a multithreaded python program on the pi. There is a thread which is running continuously waiting for an RFID input to start a set of actions. From the past 2 months it was running uninterrupted . But of late I have seen the pi freezing a lot. When I check my logs, I see the following garbage characters below before the pi freezes,
Is the RFID reader randomly getting these garbage values ?

What could be the reason for this ?

1.) Low temperatures ?
2.) Voltage supply problems (voltage and current drops ?) Powered USB hub drawing power from the pi instead of the supply ?
3.) Pi damaged ?
4.) RFID reader problem ( currently using serial interface for the RFID,

I recently followed the instructions on this page ( ... tification) to autoreboot the system if the pi hangs. I have to see how this watchdog will work out.
Last edited by bobdx_cool on Mon Feb 23, 2015 8:41 pm, edited 1 time in total.

Posts: 741
Joined: Thu Jan 09, 2014 5:38 am
Location: USA

Re: Raspberry pi hanging up

Fri Feb 20, 2015 2:55 pm

I would say 1 and 2 are excellent first guesses. Fortunately they're relatively easy to test. Replace the power supply with a known good one and put the Pi and, if possible the power supply and RFID reader too, in an enclosure (probably with a nightlight bulb) to keep them warmer.

Cheap and easy. If those don't solve it, you can look into replacing the Pi or RFID reader next.

Return to “Automation, sensing and robotics”