Posts: 2
Joined: Mon Nov 11, 2013 2:11 pm

Raspberry PI Gameboy MAME

Mon Nov 11, 2013 2:32 pm

Hi everyone,

Here is a quick look at a project im working on. It's pretty much a gameboy case and buttons intergrated with a pi and an arduino.



I've taken a few components off the pi to make it fit


I wired a Teensy 2.0++ to the contact pads on the front using an old IDE cable and connected the teensy to the pi via usb interfacing as a keyboard.


I used a 1.3Mah lipo and a 3.5" car screen with a 5v 3a ubec for the PI.

So far:

I also need put a balance plug on the outside of the case to tidy it up a bit. The buttons on the front are all working and correctly mapped.

Inspiration from :http://www.raspberrypi.org/phpBB3/viewt ... 4&p=301844


Posts: 3
Joined: Thu Nov 21, 2013 1:48 am

Re: Raspberry PI Gameboy MAME

Thu Nov 21, 2013 1:54 am

How are you keeping everything in the gameboy do you screw it together?

Posts: 14
Joined: Sat Aug 31, 2013 11:27 pm

Re: Raspberry PI Gameboy MAME

Mon Nov 25, 2013 1:24 am

how are you powering it off?

Return to “Gaming”