User avatar
Arjan
Posts: 262
Joined: Sat Sep 08, 2012 1:59 pm

breakout board : UART, I2C, SDCARD, SPI-GPIO, SPI-ILDA

Thu Apr 18, 2013 3:07 pm

Hi,

For my ILDA player project, I have built the following breakout board :
brd-v4.png
brd-v4.png (21.57 KiB) Viewed 6699 times
There are connectors for:
  • SPI-ILDA --> SPI ILDA DAC board
BoB-v4.jpg
BoB-v4.jpg (52.16 KiB) Viewed 6699 times
The schematic :
sch-v4.png
sch-v4.png (29.81 KiB) Viewed 6699 times
I am happy to share the EAGLE 6.3.0 files.

Regards, Arjan
http://www.raspberrypi-dmx.org/
Open Source DMX/RDM/MIDI/OSC/Art-Net/sACN solutions

User avatar
Arjan
Posts: 262
Joined: Sat Sep 08, 2012 1:59 pm

Re: breakout board : UART, I2C, SDCARD, SPI-GPIO, SPI-ILDA

Fri May 03, 2013 8:53 am

http://www.raspberrypi-dmx.org/
Open Source DMX/RDM/MIDI/OSC/Art-Net/sACN solutions

toxibunny
Posts: 1382
Joined: Thu Aug 18, 2011 9:21 pm

Re: breakout board : UART, I2C, SDCARD, SPI-GPIO, SPI-ILDA

Fri May 03, 2013 9:51 am

Very handy, especially the external SD card...
note: I may or may not know what I'm talking about...

erry2907
Posts: 2
Joined: Tue May 21, 2013 9:39 pm

Re: breakout board : UART, I2C, SDCARD, SPI-GPIO, SPI-ILDA

Tue May 21, 2013 9:44 pm

Hey Arjen,
could you help me to het this going on my pi?
I m a little bit of an starter with linux
electronics is no problem :D

User avatar
Arjan
Posts: 262
Joined: Sat Sep 08, 2012 1:59 pm

Re: breakout board : UART, I2C, SDCARD, SPI-GPIO, SPI-ILDA

Sat May 25, 2013 1:27 pm

Hoi,

I am happy to help you.

Please bear in mind that the OpenILDA file player is NOT written in Linux, but on baremetal instead.

Arjan
http://www.raspberrypi-dmx.org/
Open Source DMX/RDM/MIDI/OSC/Art-Net/sACN solutions

erry2907
Posts: 2
Joined: Tue May 21, 2013 9:39 pm

Re: breakout board : UART, I2C, SDCARD, SPI-GPIO, SPI-ILDA

Mon May 27, 2013 10:15 am

Hey Arjen,

Thank you for helping me.

So Where do I start?
Download and run the Baremetal os?

Erwin

juanra
Posts: 4
Joined: Mon May 27, 2013 1:36 pm

Re: breakout board : UART, I2C, SDCARD, SPI-GPIO, SPI-ILDA

Mon May 27, 2013 2:12 pm

Hi any clue on how to use more than one UART at the same time?

User avatar
Arjan
Posts: 262
Joined: Sat Sep 08, 2012 1:59 pm

Re: breakout board : UART, I2C, SDCARD, SPI-GPIO, SPI-ILDA

Sun Jun 09, 2013 3:05 pm

The OpenILDA DAC board can be found here : http://www.raspberrypi.org/phpBB3/viewt ... 47#p366647
http://www.raspberrypi-dmx.org/
Open Source DMX/RDM/MIDI/OSC/Art-Net/sACN solutions

Return to “Interfacing (DSI, CSI, I2C, etc.)”