George441
Posts: 22
Joined: Tue Jan 21, 2020 4:13 pm
Location: 571 Willow Oak Dr 36695, Mobile, AL, US
Contact: Website

Unable to browse internet

Sat May 16, 2020 3:25 am

Last night I had some kind of damned problem I could not browse the internet with my raspberrypi3 but at the same time, i was able to browse the internet properly with my mobile device. And I could not browse my own site, Facebook, Gmail. The wifi signal showed a limit sign. I don't understand what kind of problem it is. Anyway, i already set up my device again. I don't have this problem anymore but if it happens in the future please let me know what kind of this problem is...
I attached a photo of that please check and advise.
Capture.JPG
Capture.JPG (125.83 KiB) Viewed 250 times
Last edited by George441 on Thu May 21, 2020 5:04 am, edited 1 time in total.
*************************************************************************
"Save a Tree - Save The Environment - Save Your Life "
=========================================================

User avatar
lpsw
Posts: 227
Joined: Thu Jun 25, 2015 4:45 pm
Location: USA

Re: Unable to browse internet

Sat May 16, 2020 3:35 am

It's possible your phone connected via cellular and not through your wifi...and you just had a temp internet outage. Just a thought.

On another topic, you should remove your home address, it's TMI.
Self-education is, I firmly believe, the only kind of education there is - Isaac Asimov

George441
Posts: 22
Joined: Tue Jan 21, 2020 4:13 pm
Location: 571 Willow Oak Dr 36695, Mobile, AL, US
Contact: Website

Re: Unable to browse internet

Sat May 16, 2020 3:57 am

lpsw wrote:
Sat May 16, 2020 3:35 am
It's possible your phone connected via cellular and not through your wifi...and you just had a temp internet outage. Just a thought.

On another topic, you should remove your home address, it's TMI.
I checked it was the wifi.
*************************************************************************
"Save a Tree - Save The Environment - Save Your Life "
=========================================================

Return to “Networking and servers”