About to refurbish a vintage radio

[Thoughtfission]

Internet Radio Build.zip

Build Discussion Doc

(221.18 KiB) Downloaded 27 times

Hello,

I am about turn a vintage radio into an internet radio using a Raspberry Pi and Amp Hat. I have put together the attached document as a starting point and would really appreciate any feedback or input that anybody would like to offer.

I am new to the Raspberry world and this is just my second build. I previously built a Rasberry NAS unit for my home network. For the most part, that seems to be working quite well.

Thanks for your help!

G

[LTolledo]

Where's the document?
maybe an image version is better?

[B.Goode]

Hello,

I am about turn a vintage radio into an internet radio using a Raspberry Pi and Amp Hat. I have put together the attached document as a starting point and would really appreciate any feedback or input that anybody would like to offer.

I am new to the Raspberry world and this is just my second build. I previously built a Rasberry NAS unit for my home network. For the most part, that seems to be working quite well.

Thanks for your help!

G

There is a similar recent forum discussion here that might be relevant: https://www.raspberrypi.org/forums/view ... 3&t=255999

[Thoughtfission]

Hi @LTolledo,

Doc should be there now. Not sure why it didn't show on the first try. Sorry for the confusion.

[LTolledo]

OK, got a chance to read it finally.

I already have several Volumio setups

RPi HiFi sources.jpg (224.4 KiB) Viewed 526 times

and contemplating on raising it to the next level (adding 3.5" screen and a rotary encoder for Volume and selection) .
I've already got the other hard ware.. just finding time to get it all together, in a good boxed setup

[peppy.player]

Here is the most complete document which I've seen regarding this topic:
https://bobrathbone.com/raspberrypi/doc ... 0Radio.pdf

Good luck!