Ubuntu 19.10 (Eoan Ermine) released

[fruitoftheloom]

https://wiki.ubuntu.com/EoanErmine/ReleaseNotes


Raspberry Pi
Our Ubuntu 19.10 Raspberry Pi 32-bit and 64-bit preinstalled images (raspi3) now support the Raspberry Pi 4 platform out-of-the-box. With this, our images now support almost all modern flavors of the Raspberry Pi family of devices (Pi 2, Pi 3B, Pi 3B+, CM3, CM3+, Pi 4).


Raspberry Pi 3 A+ issues
Due to some firmware issues, the Ubuntu 19.10 Raspberry Pi images can no longer boot on the Raspberry Pi 3 A+ development devices. This issue is tracked in bug number 1848247.



Ubuntu Server on a Raspberry Pi 2, 3 or 4

https://ubuntu.com/download/iot/raspberry-pi

[Pulsar33]

Hello,

Displays "login" but continues to install and stucks after "cloud init"

What's the problem ?
Pulsar33

[B.Goode]

Hello,

Displays "login" but continues to install and stucks after "cloud init"

What's the problem ?
Pulsar33

Maybe ask in a Canonical form?
https://ubuntuforums.org/

[maximumwarp]

Hello,

Displays "login" but continues to install and stucks after "cloud init"

What's the problem ?
Pulsar33

Same problem here...

[jamesh]

Hello,

Displays "login" but continues to install and stucks after "cloud init"

What's the problem ?
Pulsar33

Same problem here...

Same suggestion - ask Canonical. Ubuntu is their distro, it's their job to support it. We have our own distro, Raspbian, which we are happy to support.

[fruitoftheloom]

Hello,

Displays "login" but continues to install and stucks after "cloud init"

What's the problem ?
Pulsar33

Same problem here...

Same suggestion - ask Canonical. Ubuntu is their distro, it's their job to support it. We have our own distro, Raspbian, which we are happy to support.

+ 100%

[leggazoid]

The problem is the USB ports don't work.

You can SSH into the Pi 4 with:

User: ubuntu
Pass: ubuntu

It will then ask for new password.

This only works if you have ethernet cable connected.

[Pulsar33]

Hum, I don't understand ...

First point, I follow and try to be useful on this forum since I have 2 RPi4. As far as I know, this forum is a Raspberry Pi forum, not a Raspbian forum, even if I understand that Raspbian is your preferred OS. I find it cool but I'm glad to discover other capabilities of the SBC and this is why I bought 2 of them, one for daily use and the other to perform tests.

Second point, a high-level user fruitoftheloom (20720 posts) begins a thread with the announcement of a new OS availability. Having time and available board and SDcard, I give it a try. And having problems, I report them here, as an answer to fruitoftheloom.

@B.Goods, @jamesh and @fruitoftheloom : why bashing me ?
Pulsar33

[maximumwarp]

The problem is the USB ports don't work.

You can SSH into the Pi 4 with:

User: ubuntu
Pass: ubuntu

It will then ask for new password.

This only works if you have ethernet cable connected.

I logged in by ssh with ubuntu/ubuntu and the changed default password, it works but why USB port doesn't work? Solution?

Thank you!

[fruitoftheloom]

Hum, I don't understand ...

First point, I follow and try to be useful on this forum since I have 2 RPi4. As far as I know, this forum is a Raspberry Pi forum, not a Raspbian forum, even if I understand that Raspbian is your preferred OS. I find it cool but I'm glad to discover other capabilities of the SBC and this is why I bought 2 of them, one for daily use and the other to perform tests.

Second point, a high-level user fruitoftheloom (20720 posts) begins a thread with the announcement of a new OS availability. Having time and available board and SDcard, I give it a try. And having problems, I report them here, as an answer to fruitoftheloom.

@B.Goods, @jamesh and @fruitoftheloom : why bashing me ?
Pulsar33

We are not bashing, just pointing out that the developers of the Operating System will be better placed to "fix" issues.

Or to flip it the other way, without being aware of issues how can the developers rectify the issues ?

[Lipown]

Thanks for saving. I just wanted to start instaling as i want to ged rid of videos tearing in raspbian. I will wait then.

[geev03]

' Kernel: 5.3.0-1007-raspi2'

Code: Select all

[email protected]:~$ neofetch
            .-/+oossssoo+/-.               [email protected]
        `:+ssssssssssssssssss+:`           -------------
      -+ssssssssssssssssssyyssss+-         OS: Ubuntu 19.10 aarch64
    .ossssssssssssssssssdMMMNysssso.       Host: Raspberry Pi 4 Model B Rev 1.1
   /ssssssssssshdmmNNmmyNMMMMhssssss/      Kernel: 5.3.0-1007-raspi2
  +ssssssssshmydMMMMMMMNddddyssssssss+     Uptime: 10 mins
 /sssssssshNMMMyhhyyyyhmNMMMNhssssssss/    Packages: 574 (dpkg), 3 (snap)
.ssssssssdMMMNhsssssssssshNMMMdssssssss.   Shell: bash 5.0.3
+sssshhhyNMMNyssssssssssssyNMMMysssssss+   Terminal: /dev/pts/0
ossyNMMMNyMMhsssssssssssssshmmmhssssssso   CPU: (4) @ 1.500GHz
ossyNMMMNyMMhsssssssssssssshmmmhssssssso   Memory: 194MiB / 3793MiB
+sssshhhyNMMNyssssssssssssyNMMMysssssss+
.ssssssssdMMMNhsssssssssshNMMMdssssssss.
 /sssssssshNMMMyhhyyyyhdNMMMNhssssssss/
  +sssssssssdmydMMMMMMMMddddyssssssss+
   /ssssssssssshdmNNNNmyNMMMMhssssss/
    .ossssssssssssssssssdMMMNysssso.
      -+sssssssssssssssssyyyssss+-
        `:+ssssssssssssssssss+:`
            .-/+oossssoo+/-.

[email protected]:~$

[Pulsar33]

We are not bashing, just pointing out that the developers of the Operating System will be better placed to "fix" issues.
Or to flip it the other way, without being aware of issues how can the developers rectify the issues ?

I don't feel involved for this at this time, but I find useful to inform this forum users that there's a problem. So that's what I did.

Maybe I will try to connect via ssh and register my Bluetooth keyboard and mouse ... SSH only is not my dream.
BR
Pulsar33

[jamesh]

Thanks for saving. I just wanted to start instaling as i want to ged rid of videos tearing in raspbian. I will wait then.

I doubt it will fix that.

As for bashing, not at all. What is the point of reporting a problem with software to people who have nothing to do with that software? It needs to be reported to Canonical. We cannot help you, Canonical can. Yes, its runs on a Pi, but so does a lot of other software that is nothing to do with us. No problem with giving people a heads up, just don't expect answers as there unlikely to be anyone here (official) who can answer them.

[jamesh]

The problem is the USB ports don't work.

You can SSH into the Pi 4 with:

User: ubuntu
Pass: ubuntu

It will then ask for new password.

This only works if you have ethernet cable connected.

I logged in by ssh with ubuntu/ubuntu and the changed default password, it works but why USB port doesn't work? Solution?

Thank you!

Usually mismatched modules, but again, this is a problem for Canonical, not Raspberry pi. Nothing to do with us.

[Pulsar33]

What is the point of reporting a problem with software to people who have nothing to do with that software?

Read my previous answer again.

just don't expect answers as there unlikely to be anyone here (official) who can answer them.

Didn't expect an official answer. Just wanted to inform and know if someone had a clue. Seems that leggazoid had it.
Thanks to leggazoid !

Subject closed for me
Regards
Pulsar33

[AlxMedia]

USB ports won't work for me either on 64bit with RPi4 4GB, so no keyboard works when trying to login.

Same issue reported by others here:
https://ubuntuforums.org/showthread.php?t=2429396

[Pulsar33]

Connected through ssh and password changed
apt-get update & upgrade => nothing to do

sudo apt-get install kubuntu-desktop => about 1 hour => ok => reboot => graphical login
No radio keyboard and mouse despite usb hubs seen
Tried to connect Bluetooth keyboard and mouse : no Bluetooth device seen

Code: Select all

Welcome to Ubuntu 19.10 (GNU/Linux 5.3.0-1007-raspi2 aarch64)

 * Documentation:  https://help.ubuntu.com
 * Management:     https://landscape.canonical.com
 * Support:        https://ubuntu.com/advantage

  System information as of Fri Oct 18 17:17:22 UTC 2019

  System load:  3.64               Processes:           159
  Usage of /:   18.0% of 29.05GB   Users logged in:     0
  Memory usage: 12%                IP address for eth0: 192.168.0.145
  Swap usage:   0%

 * Kata Containers are now fully integrated in Charmed Kubernetes 1.16!
   Yes, charms take the Krazy out of K8s Kata Kluster Konstruction.

     https://ubuntu.com/kubernetes/docs/release-notes

0 updates can be installed immediately.
0 of these updates are security updates.
[email protected]:~$ uname -a
Linux ubuntu 5.3.0-1007-raspi2 #8-Ubuntu SMP Thu Oct 10 12:42:47 UTC 2019 aarch64 aarch64 aarch64 GNU/Linux
[email protected]:~$ lsusb
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub	
[email protected]:~$ rfkill list
0: phy0: Wireless LAN
	Soft blocked: no
	Hard blocked: no

Pulsar33

[andrum99]

USB ports won't work for me either on 64bit with RPi4 4GB, so no keyboard works when trying to login.

Same issue reported by others here:
https://ubuntuforums.org/showthread.php?t=2429396

USB seems to be broken on the 64-bit version. I get numerous USB errors:

Code: Select all

[    2.155634] usb 1-1: device descriptor read/64, error 18
[    2.403308] usb 1-1: new high-speed USB device number 3 using xhci_hcd
[    2.555566] usb 1-1: device descriptor read/64, error 18
[    2.799561] usb 1-1: device descriptor read/64, error 18
[    2.915465] usb usb1-port1: attempt power cycle
[    3.595305] usb 1-1: new high-speed USB device number 4 using xhci_hcd
[    3.731594] usb 1-1: device descriptor read/64, error 18
[    3.979560] usb 1-1: device descriptor read/64, error 18
[    4.247356] usb 1-1: new high-speed USB device number 5 using xhci_hcd
[    4.383598] usb 1-1: device descriptor read/64, error 18
[    4.576290] usb_phy_generic phy: phy supply vcc not found, using dummy regulator
[    4.623951] usb 1-1: device descriptor read/64, error 18
[    4.739511] usb usb1-port1: unable to enumerate USB device
[    4.871762] usb 2-2: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
[    4.899760] usb 2-2: device descriptor read/8, error -61
[    5.011382] usb 2-2: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
[    5.035737] usb 2-2: device descriptor read/8, error -61
[    5.375695] usb 2-2: new SuperSpeed Gen 1 USB device number 3 using xhci_hcd
[    5.400176] usb 2-2: device descriptor read/8, error -61
[    5.515784] usb 2-2: new SuperSpeed Gen 1 USB device number 3 using xhci_hcd
[    5.547826] usb 2-2: device descriptor read/8, error -61
[    5.687470] usb usb2-port2: attempt power cycle
[    6.135637] usb 2-2: new SuperSpeed Gen 1 USB device number 4 using xhci_hcd
[    6.159693] usb 2-2: device descriptor read/8, error -61
[    6.271306] usb 2-2: new SuperSpeed Gen 1 USB device number 4 using xhci_hcd
[    6.291672] usb 2-2: device descriptor read/8, error -61
[    6.627634] usb 2-2: new SuperSpeed Gen 1 USB device number 5 using xhci_hcd
[    6.651696] usb 2-2: device descriptor read/8, error -61
[    6.763306] usb 2-2: new SuperSpeed Gen 1 USB device number 5 using xhci_hcd
[    6.787706] usb 2-2: device descriptor read/8, error -61
[    6.927429] usb usb2-port2: unable to enumerate USB device
[   12.580450] usbcore: registered new interface driver brcmfmac

Note that this is an *official* build of Ubuntu 19.10 Server, so it will get fixed at some point. It would have been nice if Canonical had provided Pi-specific release notes, or a link to a forum where we could get more info. They've basically thrown it over the wall and said "here you go".

[R3fl3ct3d_1nf1n1ty]

Official bug -
https://bugs.launchpad.net/ubuntu/+bug/1848703

[AlxMedia]

Bug report here:
https://bugs.launchpad.net/ubuntu/+bug/1848703

There's a bug report here. Jump in, look at it, and click effects me at the top. https://bugs.launchpad.net/ubuntu/+bug/1848703

[R3fl3ct3d_1nf1n1ty]

I managed to figure out the IP address using nmap -
https://www.raspberrypi.org/documentati ... address.md

[jamesh]

USB ports won't work for me either on 64bit with RPi4 4GB, so no keyboard works when trying to login.

Same issue reported by others here:
https://ubuntuforums.org/showthread.php?t=2429396

USB seems to be broken on the 64-bit version. I get numerous USB errors:

Code: Select all

[    2.155634] usb 1-1: device descriptor read/64, error 18
[    2.403308] usb 1-1: new high-speed USB device number 3 using xhci_hcd
[    2.555566] usb 1-1: device descriptor read/64, error 18
[    2.799561] usb 1-1: device descriptor read/64, error 18
[    2.915465] usb usb1-port1: attempt power cycle
[    3.595305] usb 1-1: new high-speed USB device number 4 using xhci_hcd
[    3.731594] usb 1-1: device descriptor read/64, error 18
[    3.979560] usb 1-1: device descriptor read/64, error 18
[    4.247356] usb 1-1: new high-speed USB device number 5 using xhci_hcd
[    4.383598] usb 1-1: device descriptor read/64, error 18
[    4.576290] usb_phy_generic phy: phy supply vcc not found, using dummy regulator
[    4.623951] usb 1-1: device descriptor read/64, error 18
[    4.739511] usb usb1-port1: unable to enumerate USB device
[    4.871762] usb 2-2: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
[    4.899760] usb 2-2: device descriptor read/8, error -61
[    5.011382] usb 2-2: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
[    5.035737] usb 2-2: device descriptor read/8, error -61
[    5.375695] usb 2-2: new SuperSpeed Gen 1 USB device number 3 using xhci_hcd
[    5.400176] usb 2-2: device descriptor read/8, error -61
[    5.515784] usb 2-2: new SuperSpeed Gen 1 USB device number 3 using xhci_hcd
[    5.547826] usb 2-2: device descriptor read/8, error -61
[    5.687470] usb usb2-port2: attempt power cycle
[    6.135637] usb 2-2: new SuperSpeed Gen 1 USB device number 4 using xhci_hcd
[    6.159693] usb 2-2: device descriptor read/8, error -61
[    6.271306] usb 2-2: new SuperSpeed Gen 1 USB device number 4 using xhci_hcd
[    6.291672] usb 2-2: device descriptor read/8, error -61
[    6.627634] usb 2-2: new SuperSpeed Gen 1 USB device number 5 using xhci_hcd
[    6.651696] usb 2-2: device descriptor read/8, error -61
[    6.763306] usb 2-2: new SuperSpeed Gen 1 USB device number 5 using xhci_hcd
[    6.787706] usb 2-2: device descriptor read/8, error -61
[    6.927429] usb usb2-port2: unable to enumerate USB device
[   12.580450] usbcore: registered new interface driver brcmfmac

Note that this is an *official* build of Ubuntu 19.10 Server, so it will get fixed at some point. It would have been nice if Canonical had provided Pi-specific release notes, or a link to a forum where we could get more info. They've basically thrown it over the wall and said "here you go".

Hmm. Nice of them to throw it in our direction.

[Terminal423]

FWIW, I installed Ubuntu 19.10 64bit on my Pi4 last night without issue (other than being unable to install a desktop package that wasn't the default).

The only thing I can think of that might have helped my case was that I'd just updated the firmware with "sudo rpi-update" earlier in the evening.

Could anyone update their firmware and try again to confirm if it resolves the issue?

[R3fl3ct3d_1nf1n1ty]

@Terminal423 - rpi-update did not make a difference. I'm guessing it worked for you as you have a 1GB version of the board.