mmbh
Posts: 2
Joined: Mon Mar 11, 2019 1:29 pm

Porting tizen 3.0 on a raspberry pi 3

Fri Mar 22, 2019 10:47 am

it's my first time to run another os on my RPI3 other than rasbian so I'm trying to set-up tizen 3.0 on my RPI3, I have found this link that describes all the steps to port tizen on a raspberry pi3 https://wiki.tizen.org/3.0_Porting_Guid ... nstruction but after finishing all the steps went I tried to test it stuck in the rainbow screen so my card is not booting. can anyone help with that?

sorry for my poor English writing.

drgeoff
Posts: 9373
Joined: Wed Jan 25, 2012 6:39 pm

Re: Porting tizen 3.0 on a raspberry pi 3

Fri Mar 22, 2019 11:12 pm

There is no Raspberry Pi 3. There are 3B, 3B+ and 3A+. The web page you reference was last updated before the 3B+ and 3A+ were released.

mmbh
Posts: 2
Joined: Mon Mar 11, 2019 1:29 pm

Re: Porting tizen 3.0 on a raspberry pi 3

Mon Mar 25, 2019 9:29 am

thank you for the reply, so it will not work with my b+ model?

fruitoftheloom
Posts: 19810
Joined: Tue Mar 25, 2014 12:40 pm
Location: Delightful Dorset

Re: Porting tizen 3.0 on a raspberry pi 3

Mon Mar 25, 2019 12:40 pm

mmbh wrote:
Mon Mar 25, 2019 9:29 am
thank you for the reply, so it will not work with my b+ model?

If you mean a 3B+ then Tizen needs newer kernel + firmware, you will need to ask the developers to support their software:

https://wiki.tizen.org/Raspberry_Pi
adieu

My other Computer is an Asus CS10 ChromeBit running Chrome Operating System.
HP Envy 4500 Wireless Printer supported by HPLIP software in Raspbian Buster.
Raspberry Pi Model 2B v1.1

Return to “Other”