In the specs of these LED matrix it says they can use up to 15amps, my understanding is that AA batteries struggle to supply anything more than 1 Amp. AA batteries would be a great solution for a small number of LEDs but I would be interested to know if they could power a LED matrix like this 1.so just use 3 standard AA batteries or 4 rechargeable AAs.
Code: Select all
# Enable audio (loads snd_bcm2835) #dtparam=audio=on
I would be very causoius about using max brightness on all LEDs at same time because the current draw will be very high and everything will likely get very hot very fast.lucas1 wrote: ↑Tue Aug 07, 2018 1:27 pmeverything works, tkanks, all LEDs are lit even at maximum brightness
Do you have an interesting example from python to learn how to use api?
https://learn.adafruit.com/neopixels-on ... i/software
Because here shows how to use the straps and not the matrix