Thank you for your replies again!
Well, I am interested to make a device case which will be used as an "airbag". I was inspired by this guy: https://www.reddit.com/r/interestingasf ... rbag_that/
But I am not going to make exactly the same thing. First of all, I will use a raspberry pi
. Also instead of using "hooks" like this guy did, I am thinking to use solenoids (https://shop.pimoroni.com/products/mini-solenoid
) which will push the springs. The springs will have plastic/silicone cups in order to protect the device. Lastly, I will use an accelerometer sensor to help the solenoids to be triggered.
This is what I have in mind overall, and also this is the first time I will use a RPi, that's the reason my descriptions are a bit vague
Btw so far i manage to install Rasbpian on my RPi zero W