Hi ddg,filou wrote:Cheers ddg.
I'm not sure I want to install the LMS on my rpi because I already have LMS running on my NAS (which is where my media is stored). Do I need LMS installed to make squeezeslave work? I'd assumed I could just run the rpi as a slave where the server is on the same box as my media...
Filou, are you available on Skype?filou wrote:I'm trying to use the analogue output. No HDMI connected.
I've had decent sound out of it using despotify on raspbian. Nothing from squeezeplug though. I tried stopping the squeezeslave service and modprobing but I'm not sure I tried those specific set of instructions. I'll check it out. Thanks.
ddg wrote:May I ask what are you planning to use GUI for? There may be another way to easily do what you need. If you are using Logitech Media Server then there already is a web based gui at port 9000.
Instead of using http, I'd map my smb as a network drive.
If you try to start SqueezeSlave while it's already running, because you have installed it by my script, you will get this error message. Stop the SqueezeSlave process and try again. Then you won't get this error message.filou wrote:Still not having any luck with this. Tried both SSoSBS and SSosD and running squeezeslave still gives the errorAnyone got any ideas?
Code: Select all
PortAudio error7: No output devices found.
I fear I don't understand this question. What GUI, what for? Some of the possible media servers have a GUI, others not, and they don't need one. SqueezePlug has no GUI and it don't need one. You can configure the complete system by GUI like dialogs.psx2p wrote:1.Is it possible to launch a GUI with this? is a GUI even installed? if not can I install one and how would one go about doing that? (I would like to have the option if I wanted it)
That's not integrated but maybe possible. You can easiely access the device from outside with dyndns and e.g. WinSCP.psx2p wrote:2. Is there anyway to link my Samba folder on a webpage? e.g. I would like to have the folder linked on a web page for easy access from within my network. I guess I just dont know how to open a windows explorer window from html. my shared folder is \\Raspberrypi
surepsx2p wrote:3. Can it make me coffee and fix me breakfast in the morning?
Code: Select all
Question, when I connect my external 2.5 HDD fdisk -l shows it as dev/sda but I cannot get the library configuration to recognize it as a usb device, it keeps using a partition on the SD card as the library. What am I doing wrong?
Sorry, I've not tested SqueezeSlave over WiFi on RPi. Meantime I'm creating a new image with Raspbian and a new complied version of SqueezeSlave. We should have a look here, when it's ready. But sorry it will last some days to finish the new image, so please be a bit patient!preki wrote:Hi, I'm trying to set things up to have my RPi be a wireless squeezeslave (with the squeezeserver installed on a separate NAS device).
I ran the setup and have squeezeslave installed fine, and I also installed the drivers (zd1211) for my wifi dongle. All seems to be working fine when I'm connected by an ethernet cable, but not when I'm using wifi. I can stream maybe one track, or a part of a track, by wifi before the streaming stops. After this, the squeezeslave is no longer visible to the squeezeserver, but the wifi connection is still up (I can ping between the server and slave devices).
Can anyone please offer any suggestions how I could fix this?
Thanks (especially to truehl for putting this together),
I am having the same streaming speed issue. I tried adding the custom-convert.conf as in the squeezebox forums. No luck. Any advice is appreciated.sondulac wrote:I've received my RSB 2 days ago and the setup of Squeezeplug was easy and with no problem.
I've already LMS running on a PC in my home network so I've installed only Squeezeslave.
It run well playing the music stored in my PC, but streaming internet radio I experience strange behavior:
with some stations it works fine
with some stations the music is running fast like playing a 33rpm vinyl disk at 78rpm
with some stations the music has interruptions every 2 seconds
I've other Logitech devices in the network and they work fine.
Someone has idea of a solution?