The HELO received is in a ascii decimal format (http://www.nthelp.com/ascii.htm)blavery wrote:luisantunes,
The RECV end (PRX mode) awaits packages, displays the "HELO" (in hex) it received,
... and every alternate time prepares a payload to be bundled with the next AUTO-ACK process.
So the reply is seen by the PTX a transaction delayed - it arrives with the ACK sequence of the next transfer. The PRX cannot initiate a transfer, it can only set up a return package to catch a free ride on the next ACK sequence.
Both forward packet payload and return payload are variable size to 32 bytes.
Code: Select all
print (''.join(chr(i) for i in recv_buffer))
I figured it was just easier to send string instead of a list. So I changed the code a bit. Just input the command you want to send, and if it reaches more than 32bits, the program will creates chunks of 32bits.
Code: Select all
#you still need the top portion of the code in send-rpi.py #credits http://stackoverflow.com/questions/18854620/whats-the-best-way-to-split-a-string-into-fixed-length-chunks-and-work-with-the?answertab=active#tab-top def chunkstring(string,length): return (string[0+i:length+i] for i in range(0,len(string),length)) while True: buf = input("enter the command to send") buf = list(chunkstring(buf,32)) print("nombre de packet de 32bits : " + str(len(buf))) radio.write("Chunk:" + str(len(buf))) c = (c + 1) & 255 # send a packet to receiver for i in buf: radio.write(i) print ("Sent:"), print (i) # did it return with a payload? if radio.isAckPayloadAvailable(): pl_buffer= radio.read(pl_buffer, radio.getDynamicPayloadSize()) print ("Received back:"), print (pl_buffer) else: print ("Received: Ack only, no payload")
I don't know if this help anyone.
Thanks for OP for all the info