Project XXX wrote:Is it possible that you can PM me the PCB-Files for the LQ092B5DW01 + BOM , cause if the "only" thing you need for it to work is software dependent, then mabye I can try to do some testing on that part, and see if i can find the right settings for it?
so, let me make another one!
1) look at these two links: https://www.raspberrypi.org/documentati ... /README.md
The first will direct you to the RPi DPI description, the second to the LQ092B5DW01 data sheet.
2) Spend some time on designing your own PCB, get it manufactured, assembled and tested
timing is still not perfect but I'm nearly there. The PCB to the right (blue one) is a Step-Up for generating 18V BL voltage, the smaller green one is an adapter PCB for the displays FPC connector (Backlight is 10-pol FPC connector).