aBUGSworstnightmare
Posts: 1479
Joined: Tue Jun 30, 2015 1:35 pm

18.5in FHD with PCAP all-in one

Mon Aug 29, 2016 12:31 pm

Hi,

just wanted to show you a few pictures of my latest build - a 18.5in module with PCAP - assembled to an all-in-one solution.
WP_20160829_13_57_18_Smart.jpg
front view
WP_20160829_13_57_18_Smart.jpg (61.42 KiB) Viewed 1085 times
WP_20160829_14_00_24_Smart.jpg
rear view - AD-board on the left side, RPi on the right. Small PCB top-left is for controlling the OSD
WP_20160829_14_00_24_Smart.jpg (60.31 KiB) Viewed 1085 times
Touch is working but only single-touch is possible atm.
Touch controller is an Atmel MaxTouch device. Would be great if you could share some information if/how dual (or more finger) touch could be used and how to make 'right click' working.

aBUGSworstnightmare

aBUGSworstnightmare
Posts: 1479
Joined: Tue Jun 30, 2015 1:35 pm

Re: 18.5in FHD with PCAP all-in one

Mon Aug 29, 2016 12:33 pm

WP_20160829_13_59_42_Smart.jpg
WP_20160829_13_59_42_Smart.jpg (51.5 KiB) Viewed 1080 times
WP_20160829_13_59_58_Smart.jpg
WP_20160829_13_59_58_Smart.jpg (44.31 KiB) Viewed 1080 times
WP_20160829_14_01_47_Smart.jpg
WP_20160829_14_01_47_Smart.jpg (46.87 KiB) Viewed 1080 times
Some more pictures of the unit. Feedback on how to improve touch performance is more then welcome!

Return to “Graphics, sound and multimedia”