Compute module not talking

[davorin]

Got the two replacement boards now...

Both look the same when plugging in....not enumerated when plugging them in....

Now trying with an RPi as host...but I assume it won't succeed....

[davorin]

Weird....though it also complained about read errors when plugging in the compute module on RPi the "dd" went fine this time:

Code: Select all

root@raspberrypi:/home/pi# time dd if=2014-06-20-wheezy-raspbian.img of=/dev/sda bs=4MiB
706+1 records in
706+1 records out
2962227200 bytes (3.0 GB) copied, 504.884 s, 5.9 MB/s

real	8m24.926s
user	0m0.050s
sys	1m3.290s

[davorin]

First one passed the test

Quite impressed about low current consumption with plugged in ethernet adapter and playing back a h264 movie via NFS...
not much difference between playing with omxplayer and being idle...

The current consumption was measured with GPIB from a 6632B, which also powers the dev kit...