Page 2 of 2

Re: ENC28J60 on SPI1

Posted: Wed Oct 17, 2018 3:51 pm
by PhilE
You'll need to enable DHCP on that interface (in whatever distribution you are using).

Re: ENC28J60 on SPI1

Posted: Wed Oct 17, 2018 9:57 pm
by rego21
It's working but only whe connected to the router. When directly connected to the PC i cant ssh...

Re: ENC28J60 on SPI1

Posted: Thu Oct 18, 2018 7:57 am
by PhilE
That's not surprising unless your PC is running a DHCP server. Try giving the Pi and PC static IP addresses, or configure the PC to bridge the Ethernet port to WiFi to allow the Pi to share it (depending on your requirements).

Re: ENC28J60 on SPI1

Posted: Thu Oct 18, 2018 1:55 pm
by rego21
PhilE wrote:
Thu Oct 18, 2018 7:57 am
That's not surprising unless your PC is running a DHCP server. Try giving the Pi and PC static IP addresses, or configure the PC to bridge the Ethernet port to WiFi to allow the Pi to share it (depending on your requirements).
See my new post! Thanks for your help i fixed the problem today! See if you can help me with : viewtopic.php?f=98&t=225043