Regarding the Compute Module 3, is it possible to use an I2S audio codec IC such as the PCM5102 on GPIO Bank 1 instead of Bank 0?
I was hoping to use all the pins of Bank 0 for 24 bit DPI functionality. Therefore, using I2S on Bank 1 would be great. I'm using the compute module datasheet here: http://docs-europe.electrocomponents.co ... 54fe3b.pdf
Also using additional pin information here: http://elinux.org/RPi_BCM2835_GPIOs
If I2S is not an option, I imagine using PWM audio output is the only other option?
Thanks in advance.