We have ready some enclosure for Raspberry Pi 2 and B + models.
We have redesigned the height of the case for the better the display interface cards and enlarged the hole of the power connector.
In this picture the cover was made by customer request.
The package Includes: 6 pieces of birch plywood and 4 screws and nuts.
Keep your Raspberry Pi® computer safe and sound in this lovely birch wooden enclosure.
We designed this case to be beautiful, easy to assemble and perfect for any use (but especially for those who want to tinker!)
The case comes as 6 pieces that slide together and secure with four screws.
Made of birch plywood this case keeps the Pi secure, has a hinged top for connector access, and even has little feet cut into the sides so that it stands up above your desk.
You can use all of the connectors on the edges of the Pi: HDMI, Audio/Video, microSD slot, micro USB power, Ethernet and the 4 USB ports.
There's also a cut out to allow a 40-pin IDC cable to the GPIO breakout pins on the Pi and pass it though the case.
For more advanced hacking, the enclosure is designed so that you can lift or remove the top piece and plug any sort of cables you wish into the breakouts in the middle.
The case is airy enough that no additional vents or cooling is required - we tested the enclosed Pi over a 24 hour period at full load with no significant increase in temperature.
In a few days it will be in stores AMAZON for distribution.