If you are absolutely scuppered look for an old TV with a scart lead socket then get one of these
http://www.ebay.co.uk/itm/like/35100479 ... 0&ff14=108
You don't need this particular model this was just the first one I found on ebay
You will notice these are not expensive.
Plug a phono lead between the yellow rca connector on the RPi to the Yellow on the scart converter put your TV on Scart (might be VCR it the TV is really old) don't expect realy sharp firstime you try.
You will need to experiment with the config settings.
But this should work for any TV that has a scart socket.
This includes CRT TV's
Noob is not derogatory the noob is just the lower end of the noob--geek spectrum being a noob is just your first step towards being an uber-geek
If you find a solution please post it in the wiki the forum dies too quick