Output to VGA
Is it possible to output in VGA through the usage of an adapter?
Re: Output to VGA
Yes, VGA adapters are known to work with Raspberry Pi.
See this doc at the elinux wiki for a list of known working adapters and other important info. They can be pretty tricky to set up depending on the adapter used.
You'll likely also want to research VGA specific settings for your /boot/config.txt
See this doc at the elinux wiki for a list of known working adapters and other important info. They can be pretty tricky to set up depending on the adapter used.
You'll likely also want to research VGA specific settings for your /boot/config.txt
-
FTrevorGowen
- Forum Moderator
- Posts: 5590
- Joined: Mon Mar 04, 2013 6:12 pm
- Location: Bristol, U.K.
- Contact: Website
Re: Output to VGA
FWIW, this page of mine may be of interest:stevepdp wrote: ...
You'll likely also want to research VGA specific settings for your /boot/config.txt
http://www.cpmspectrepi.webspace.virgin ... GA_Monitor
Trev.
Still running Raspbian Jessie or Stretch on some older Pi's (an A, B1, 2xB2, B+, P2B, 3xP0, P0W, 2xP3A+, P3B+, P3B, B+, and a A+) but Buster on the P4B's. See: https://www.cpmspectrepi.uk/raspberry_pi/raspiidx.htm