Raspberry Pi Forums

hello, i am fresh noobling that just bought raspberry pi. i also bought tft lcd arduino touchscreen, the TFT_320QVT one without much of knowing what i got myself into, apparently i need a shield of somesort to get it work with raspberry. but how do i start with this project?

I've found couple of attempts with this setup but neither of them have any hands on guide for a newbie to connect the boards.

http://marks-space.com/2013/05/23/raspb ... h-control/

here someone has made a board to use between the tft and raspberry.

http://www.raspberrypi.org/phpBB3/viewt ... 44&t=45201

and here is an topic about similiar screen that i have that is seemingly still open?

i plan to eventually install all the component's i've bought to this


here's the screen itself.



thank you from your patience and answer.

as for now i will buy arduino and an lcd shield for it, and then attempt at getting arduino and raspberry talking together?
sadly vladovl's site is down so i cant see the schematics for the setting without arduino?

now ive got the arduino with the lcd shield, arduino is sending data but im unable to figure out how to get it working as an screen for raspberry :/ ??

i managed to get the lcd connected to raspberry's gpio pins with cables but now im wondering how to get it working properly