Raspberry Pi Forums

Hi,

I hope this is the right forum for this. I have an external device that I want to control. To be able to control it I need to connect two pins together (like manually putting a wire between two pins (input to ground)). The device has 5 inputs so pin 1 to ground activates channel 1, pin 2 to ground activates channel 2 and so on. What is the best/easiest and safest way to achieve this?

Thanks in advance!

Hi,

nickeh wrote:What is the best/easiest and safest way to achieve this?

Read this thread: http://www.raspberrypi.org/forum/viewto ... 13#p457513


Best wishes, Ivan Zilic.

Thanks Ivan!