TheoPA3DSS
Posts: 29
Joined: Fri Nov 09, 2018 9:27 am
Location: Netherlands

external drive not available after update

Fri Sep 18, 2020 10:13 pm

after this video tonight, i can't mount my external HD connected via usb anymore after a reboot

Code: Select all

https://www.youtube.com/watch?v=8tTFgrOCsig&t=114s
as root i get this after fdisk -l:

Code: Select all

Disk /dev/sda: 2.7 TiB, 3000592982016 bytes, 732566646 sectors
Disk model: External USB 3.0
Units: sectors of 1 * 4096 = 4096 bytes
Sector size (logical/physical): 4096 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 33550336 bytes
Disklabel type: dos
Disk identifier: 0xc691c6b4
ofcourse /media/extern exist because it works until the update.
now i get these message:

Code: Select all

Device     Boot Start       End   Sectors  Size Id Type
/dev/sda1         256 732563999 732563744  2.7T  7 HPFS/NTFS/exFAT
root@240:/home/pi#
root@240:/home/pi# ^C
root@240:/home/pi# mount -t auto /dev/sda1 /media/extern
[b]mount: /media/extern: wrong fs type, bad option, bad superblock on /dev/sda1, missing codepage or helper program, or other error.[/b]
What is going on ?

epoch1970
Posts: 5734
Joined: Thu May 05, 2016 9:33 am
Location: Paris, France

Re: external drive not available after update

Sun Sep 20, 2020 10:30 am

Comments appear to be open under that video. Did you ask there?
"S'il n'y a pas de solution, c'est qu'il n'y a pas de problème." Les Shadoks, J. Rouxel

TheoPA3DSS
Posts: 29
Joined: Fri Nov 09, 2018 9:27 am
Location: Netherlands

Re: external drive not available after update

Sun Sep 20, 2020 6:23 pm

No, because it has nothing to do with the video but with the raspberry pi4

epoch1970
Posts: 5734
Joined: Thu May 05, 2016 9:33 am
Location: Paris, France

Re: external drive not available after update

Sun Sep 20, 2020 7:23 pm

Ok. Good luck then.
"S'il n'y a pas de solution, c'est qu'il n'y a pas de problème." Les Shadoks, J. Rouxel

TheoPA3DSS
Posts: 29
Joined: Fri Nov 09, 2018 9:27 am
Location: Netherlands

Re: external drive not available after update

Wed Sep 23, 2020 10:18 am

'solved' by start from scratch :D

Return to “Beginners”