LIRC: mode2 does not receive IR signals


1 post
by yatri131 » Mon Jun 19, 2017 6:10 am
I am using this tutorial https://www.hackster.io/austin-stanton/creating-a-raspberry-pi-universal-remote-with-lirc-2fd581 to build a universal remote on rpi3.The problem is mode2 -d /dev/lirc0 doesnot show any output on screen.I have added gpio_pin_in=15 gpio_pin_out=16 to /etc/modules and also changed config.txt
Can anyone suggest if I'm am doing anything wrong?
Attachments
error.png
here's the screenshot of the terminal screen.
error.png (57.29 KiB) Viewed 42 times
Posts: 1
Joined: Sun Jun 18, 2017 7:31 pm