yatri131
Posts: 1
Joined: Sun Jun 18, 2017 7:31 pm

LIRC: mode2 does not receive IR signals

Mon Jun 19, 2017 6:10 am

I am using this tutorial https://www.hackster.io/austin-stanton/ ... irc-2fd581 to build a universal remote on rpi3.The problem is mode2 -d /dev/lirc0 doesnot show any output on screen.I have added gpio_pin_in=15 gpio_pin_out=16 to /etc/modules and also changed config.txt
Can anyone suggest if I'm am doing anything wrong?
Attachments
error.png
here's the screenshot of the terminal screen.
error.png (57.29 KiB) Viewed 125 times

Return to “Beginners”

Who is online

Users browsing this forum: No registered users and 59 guests