Raspberry Pi Forums

Hi all.
I have been trying to install a package (VLC) but I keep getting errors. Can't install Motion either.
Then I tried apt-get upgrade , that failed , can't find all sorts of stuff.
I then re-installed Jessie (downloaded on 11/1/2017) which I have used 5 or 6 times without any issues.
Sudo apt-get update or upgrade still wont work. Are there some servers down or something. I can't install anything at all.
Trying to install VLC I get these errors , but I get the same if I do a sudo apt-get upgrade.
Sorry about the formatting I copied it from the terminal window. It goes on for pages and pages , I'm just showing a few lines.
BTW I can browse the internet using Cromium , so my pi does have an internet connection. ping also works :0)


pi@raspberrypi:~ $ sudo apt-get install vlc
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following extra packages will be installed:
liba52-0.7.4 libbasicusageenvironment0 libcddb2 libdvbpsi9 libebml4
libfreerdp-cache1.1 libfreerdp-client1.1 libfreerdp-codec1.1
libfreerdp-common1.1.0 libfreerdp-core1.1 libfreerdp-crypto1.1
libfreerdp-gdi1.1 libfreerdp-locale1.1 libfreerdp-primitives1.1
libfreerdp-rail1.1 libfreerdp-utils1.1 libgroupsock1 libiso9660-8
liblircclient0 liblivemedia23 liblua5.2-0 libmatroska6 libmpcdec6 libmpeg2-4
libpostproc52 libproxy-tools libresid-builder0c2a libshine3 libsidplay2
libtwolame0 libupnp6 libusageenvironment1 libva-drm1 libva-x11-1 libva1
libvcdinfo0 libvlc5 libvlccore8 libvncclient0 libwinpr-crt0.1
libwinpr-crypto0.1 libwinpr-dsparse0.1 libwinpr-environment0.1
libwinpr-file0.1 libwinpr-handle0.1 libwinpr-heap0.1 libwinpr-input0.1
libwinpr-interlocked0.1 libwinpr-library0.1 libwinpr-path0.1
libwinpr-pool0.1 libwinpr-registry0.1 libwinpr-rpc0.1 libwinpr-sspi0.1
libwinpr-synch0.1 libwinpr-sysinfo0.1 libwinpr-thread0.1 libwinpr-utils0.1
libxcb-composite0 libxcb-keysyms1 libxcb-randr0 libxcb-xv0 libzvbi-common
libzvbi0 vlc-data vlc-nox vlc-plugin-notify vlc-plugin-samba
Suggested packages:
freerdp-x11 lirc videolan-doc libdvdcss2
The following NEW packages will be installed:
liba52-0.7.4 libbasicusageenvironment0 libcddb2 libdvbpsi9 libebml4
libfreerdp-cache1.1 libfreerdp-client1.1 libfreerdp-codec1.1
libfreerdp-common1.1.0 libfreerdp-core1.1 libfreerdp-crypto1.1
libfreerdp-gdi1.1 libfreerdp-locale1.1 libfreerdp-primitives1.1
libfreerdp-rail1.1 libfreerdp-utils1.1 libgroupsock1 libiso9660-8
liblircclient0 liblivemedia23 liblua5.2-0 libmatroska6 libmpcdec6 libmpeg2-4
libpostproc52 libproxy-tools libresid-builder0c2a libshine3 libsidplay2
libtwolame0 libupnp6 libusageenvironment1 libva-drm1 libva-x11-1 libvcdinfo0
libvlc5 libvlccore8 libvncclient0 libwinpr-crt0.1 libwinpr-crypto0.1
libwinpr-dsparse0.1 libwinpr-environment0.1 libwinpr-file0.1
libwinpr-handle0.1 libwinpr-heap0.1 libwinpr-input0.1
libwinpr-interlocked0.1 libwinpr-library0.1 libwinpr-path0.1
libwinpr-pool0.1 libwinpr-registry0.1 libwinpr-rpc0.1 libwinpr-sspi0.1
libwinpr-synch0.1 libwinpr-sysinfo0.1 libwinpr-thread0.1 libwinpr-utils0.1
libxcb-composite0 libxcb-keysyms1 libxcb-randr0 libxcb-xv0 libzvbi-common
libzvbi0 vlc vlc-data vlc-nox vlc-plugin-notify vlc-plugin-samba
The following packages will be upgraded:
libva1
1 upgraded, 68 newly installed, 0 to remove and 150 not upgraded.
Need to get 16.8 MB/16.9 MB of archives.
After this operation, 64.1 MB of additional disk space will be used.
Do you want to continue? [Y/n] y
Err http://mirrordirector.raspbian.org/raspbian/ jessie/main libbasicusageenvironment0 armhf 2014.01.13-1
Cannot initiate the connection to mirror.liquidtelecom.com:80 (2c0f:fe40:8001:10::1). - connect (101: Network is unreachable) [IP: 2c0f:fe40:8001:10::1 80]
Err http://mirrordirector.raspbian.org/raspbian/ jessie/main libdvbpsi9 armhf 1.2.0-1
Cannot initiate the connection to mirror.liquidtelecom.com:80 (2c0f:fe40:8001:10::1). - connect (101: Network is unreachable) [IP: 2c0f:fe40:8001:10::1 80]
Err http://mirrordirector.raspbian.org/raspbian/ jessie/main libebml4 armhf 1.3.0-2+deb8u1
Cannot initiate the connection to mirror.liquidtelecom.com:80 (2c0f:fe40:8001:10::1). - connect (101: Network is unreachable) [IP: 2c0f:fe40:8001:10::1 80]
Err http://mirrordirector.raspbian.org/raspbian/ jessie/main libwinpr-sysinfo0.1 armhf 1.1.0~git20140921.1.440916e+dfsg1-4
Cannot initiate the connection to mirror.liquidtelecom.com:80 (2c0f:fe40:8001:10::1). - connect (101: Network is unreachable) [IP: 2c0f:fe40:8001:10::1 80]
Err http://mirrordirector.raspbian.org/raspbian/ jessie/main libfreerdp-primitives1.1 armhf 1.1.0~git20140921.1.440916e+dfsg1-4
Cannot initiate the connection to mirror.liquidtelecom.com:80 (2c0f:fe40:8001:10::1). - connect (101: Network is unreachable) [IP: 2c0f:fe40:8001:10::1 80]
Err http://mirrordirector.raspbian.org/raspbian/ jessie/main libwinpr-crt0.1 armhf 1.1.0~git20140921.1.440916e+dfsg1-4
Cannot initiate the connection to mirror.liquidtelecom.com:80 (2c0f:fe40:8001:10::1). - connect (101: Network is unreachable) [IP: 2c0f:fe40:8001:10::1 80]
Err http://mirrordirector.raspbian.org/raspbian/ jessie/main libwinpr-environment0.1 armhf 1.1.0~git20140921.1.440916e+dfsg1-4
Cannot initiate the connection to mirror.liquidtelecom.com:80 (2c0f:fe40:8001:10::1). - connect (101: Network is unreachable) [IP: 2c0f:fe40:8001:10::1 80]
Err http://mirrordirector.raspbian.org/raspbian/ jessie/main libwinpr-handle0.1 armhf 1.1.0~git20140921.1.440916e+dfsg1-4
Cannot initiate the connection to mirror.liquidtelecom.com:80 (2c0f:fe40:8001:10::1). - connect (101: Network is





Any ideas please.
Cheers
Neddie

I did a fresh install last night on both my pi zero and my pi 3 and while my pi zero can update/upgrade with no problem my pi 3 is having the same issue as you.

My PI2 is also giving the same error :0(
Not sure where to go from here. If it was /is a general Linux upgrade issue
I'd have expected to see a lot more noise on the issue , but nothing out of
the ordinary.
I'm going to try it at work today and see if I get the same results.
Neddie

We recently split services up among more servers due to ever-increasing demand.

It looks like we are having issues with database replication from the machine that scans the mirrors to the machine that runs the public mirror redirection service.

I have changed the replication settings and done a forced update of the db. The liquidtelecom mirror is now correctly showing as offline.

Please tell me if you have any further problems.

Phew , thought I was going nuts. I'm sure that is what the problem was , I'll
come back if the issue is NOT fixed.
Cheers
Neddie

Neddie wrote:Phew , thought I was going nuts. I'm sure that is what the problem was , I'll
come back if the issue is NOT fixed.
Cheers
Neddie

You are not going nuts, it would appear that more servers are hosting worldwide, and for some reason they are not synching. It happened to me yesterday.

Fresh install of Raspbian on my Pi Zero. When running update, it gets past the archive.raspberrypi.org links pretty quick, then stalls for a while. First time through I couldnt get any mirrordirector links, second time the same, third time it seems to get the first 3 (contrib, non-free, and rpi armhf packages, but then sits at 100% [Waiting for headers] for a few minutes and then error, can't connect.

I too have an up to date (as of last week) Jessie on a Pi3 and am struggling to install pycurl.
It took a good 5 minutes before the action completed...
sudo apt-get install python-pycurl
(stuck on waiting for headers)

I made some configuration changes this afternoon, please tell me if things have improved.