Sounds like a networking problem. Is it possible you have two machines assigned to the same IP number?RDK wrote:I just created a Jessie build for one of my Raspberry Pi B+'s. The functionality is "identical" between the Wheezy and Jessie setups. Both are running headless and accessed using Putty. The Jessie build seems to be very sluggish, often taking several seconds to respond to an "Up Cursor" key stroke. Have I missed something in creating this build or does Jessie need more "horse-power"? Thanks......RDK
Default wheezy and default Jessie versions should actually not be the same. Jessie uses dhcpcd and that required some changes to /etc/network/interfaces (compared to wheezy)RDK wrote:The "interfaces" files are the same for both the Jessie and Wheezy setups....RDK
Thanks for you help.....RDKNetwork/Interfaces:
# interfaces(5) file used by ifup(8) and ifdown(8)
# Please note that this file is written to be used with dhcpcd
# For static IP, consult /etc/dhcpcd.conf and 'man dhcpcd.conf'
# Include files from /etc/network/interfaces.d:
auto lo br0
iface lo inet loopback
iface eth0 inet manual
iface eth1 inet manual
#iface br0 inet dhcp
iface br0 inet static
dns-nameservers 220.127.116.11 18.104.22.168
bridge_ports eth0 eth1
iface wlan0 inet manual
iface default inet dhcp
# A sample configuration for dhcpcd.
# See dhcpcd.conf(5) for details.
# Allow users of this group to interact with dhcpcd via the control socket.
# Inform the DHCP server of our hostname for DDNS.
# Use the hardware address of the interface for the Client ID.
# Use the same DUID + IAID as set in DHCPv6 for DHCPv4 ClientID as per RFC4361.
# Persist interface configuration when dhcpcd exits.
# Rapid commit support.
# Safe to enable by default because it requires the equivalent option set
# on the server to actually work.
# A list of options to request from the DHCP server.
option domain_name_servers, domain_name, domain_search, host_name
# Most distributions have NTP support.
# Respect the network MTU.
# Some interface drivers reset when changing the MTU so disabled by default.
# A ServerID is required by RFC2131.
# Generate Stable Private IPv6 Addresses instead of hardware based ones
# A hook script is provided to lookup the hostname if not set by the DHCP
# server, but it should not be run by default.
Well, there's your problem.RDK wrote:As far as I know the /etc/dhcpcd.conf has never been touched.