ebijun
Posts: 80
Joined: Sat Feb 09, 2013 1:39 am

2019-09-28-netbsd-raspi-earmv6hf.img

Mon Sep 23, 2019 11:08 am

For Open Source Conference 2019 Shimane NetBSD booth demonstration,
I've updated 2019-09-28-netbsd-raspi-earmv6hf.img.gz for RPI.

http://mail-index.netbsd.org/port-arm/2 ... 06154.html

http://cdn.netbsd.org/pub/NetBSD/misc/j ... 6hf.img.gz

Update:
- NetBSD 9.99.12 evbarm-earmv6hf 201909211450Z rpi.img from nyftp.
- Testing: bwfm0 Broadcom and Cypress wireless network driver
1. add kernel configration
bwfm* at sdmmc?
2. add firmware
/libdata/firmware/if_bwfm/
LICENCE.broadcom_bcm43xx
brcmfmac43430-sdio.{bin|txt}
brcmfmac43455-sdio.{bin|txt}

- RPI4: not supported
http://mail-index.netbsd.org/port-arm/2 ... 05943.html
https://github.com/ebijun/NetBSD/blob/m ... EADME.RPI4

- pre-installed packages:
https://github.com/ebijun/NetBSD/blob/m ... rc/pkginfo
- sysinfo and pkgsrc update
https://github.com/ebijun/NetBSD/commit ... a56eab20c8

System Update:

http://cvsweb.netbsd.org/bsdweb.cgi/src ... ase/shl.mi

sysinfo:
dhcpcd-8.0.6 NetBSD-9.99.12 sh-20181212-20190921142542Z
userland-NetBSD-9.99.12/evbarm

pkgsrc:
curl-7.66.0nb1 fribidi-1.0.5 nghttp2-1.39.2nb1 pango-1.44.6
ruby24-atk-3.3.8 ruby24-cairo-gobject-3.3.8 ruby24-gdk_pixbuf2-3.3.8
ruby24-gio2-3.3.8 ruby24-glib2-3.3.8 ruby24-gobject-introspection-3.3.8
ruby24-gtk2-3.3.8 ruby24-mikutter-3.9.5nb1 ruby24-pango-3.3.8

Overview:
http://wiki.NetBSD.org/ports/evbarm/raspberry_pi/

dmesg:
https://github.com/ebijun/NetBSD/blob/m ... rmv6hf/RPI
https://github.com/ebijun/NetBSD/blob/m ... mv6hf/RPI0
https://github.com/ebijun/NetBSD/blob/m ... v6hf/RPI0W
https://github.com/ebijun/NetBSD/blob/m ... mv6hf/RPI2
https://github.com/ebijun/NetBSD/blob/m ... f/RPI2-1.2
https://github.com/ebijun/NetBSD/blob/m ... mv6hf/RPI3
https://github.com/ebijun/NetBSD/blob/m ... v6hf/RPI3A+
https://github.com/ebijun/NetBSD/blob/m ... v6hf/RPI3B+

Security:
- security.pax.mprotect.enabled
http://netbsd.org/gallery/presentations ... NetBSD.pdf
man security
man paxctl
sysctl -a |grep pax
If application failed, such as omxplayer.
try to test
sysctl -w security.pax.mprotect.enabled=0

---
Comments are welcome on port-arm netbsd mailinglist or
twitter @ebijun

Return to “NetBSD”