BlueberryPies
Posts: 3
Joined: Tue Nov 21, 2017 1:37 am

Complete panel mount setup?

Mon Jan 14, 2019 9:28 pm

Hey all,

I'm starting an arcade "box," as in a self contained arcade-in-a-box. I'm looking for a complete panel mount I/O shield, but can't seem to find one. I was looking for something like this:

https://2.bp.blogspot.com/-JXEbNdaHpSM/ ... e%2529.JPG

Does anyone know where one could find something like that, or similar?

aBUGSworstnightmare
Posts: 1283
Joined: Tue Jun 30, 2015 1:35 pm

Re: Complete panel mount setup?

Wed Jan 16, 2019 6:44 am

Most probably this thing is custom made (at least it looks like to me).
It is made of individual panel mounts (i.e. USB/RJ45/etc) on a custom carrier (looks like aluminium).

So:
- look for the panel mounts you need
- either 3D print your mounting hardware of get it milled out of metal/GFK/CFK/wood ... whatever material you prefer).

Would not spend too much time in searching for a finished one as there might be none.

hippy
Posts: 5164
Joined: Fri Sep 09, 2011 10:34 pm
Location: UK

Re: Complete panel mount setup?

Wed Jan 16, 2019 11:25 am

There are some DIN rail cases for Pi's which may be suitable for panel mounting but it is reasonably easier to build your own, for example -

https://robertoostenveld.nl/raspberry-p ... zer-module

Return to “Gaming”